| auszookers.com https://auszookers.com/forum/ |
|
| Rebuilding a Sierra steering box https://auszookers.com/forum/viewtopic.php?f=5&t=33303 |
Page 1 of 1 |
| Author: | shay [ Sun Jun 10, 2012 2:03 pm ] |
| Post subject: | Rebuilding a Sierra steering box |
wheres the best place to get steering box kits. my bottom bush thing is sloppy ,looked in my spare one to replace it and it has had water inthe oil. was wondering if i could put new bottom bearing,seal,bush thing in whith out taking out the car. also would a jimny pwr box work not hooked up,like normal box until i want to make pwr steer.any advise would be great thanks |
|
| Author: | want33s [ Sun Jun 10, 2012 2:06 pm ] |
| Post subject: | Re: has any one rebuilt thier sierra steering box |
Any bearing shop should be able to supply bearings and seal. PS box without pump hooked up will be VERY heavy steering. |
|
| Author: | SuziBlu [ Sun Jun 10, 2012 4:11 pm ] |
| Post subject: | Re: has any one rebuilt thier sierra steering box |
Arnie would be able to do the power steer thingo without the pump, normal mortals, er, no. |
|
| Author: | shay [ Sun Jun 10, 2012 4:17 pm ] |
| Post subject: | Re: has any one rebuilt thier sierra steering box |
thanks for that .dont know any thing about pwr steer. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|