Change the flanges to WT, you will also need the transfer arms and jack shaft from a WT Sierra. BenT's arms in the buisness section are a very good upgradable option
| auszookers.com https://auszookers.com/forum/ |
|
| n/t transfer in 96 coily sierra https://auszookers.com/forum/viewtopic.php?f=5&t=33340 |
Page 1 of 1 |
| Author: | fragga [ Mon Jun 11, 2012 7:35 pm ] |
| Post subject: | n/t transfer in 96 coily sierra |
brought the n/t case n 6,5 gears installed. where would i buy brackets to get it to fit in the car? or how can you get it to fit? |
|
| Author: | Rusho [ Mon Jun 11, 2012 7:42 pm ] |
| Post subject: | Re: n/t transfer in 96 coily sierra |
Change the flanges to WT, you will also need the transfer arms and jack shaft from a WT Sierra. BenT's arms in the buisness section are a very good upgradable option
|
|
| Author: | fragga [ Mon Jun 11, 2012 7:46 pm ] |
| Post subject: | Re: n/t transfer in 96 coily sierra |
ok awsome thnx. ill look for bents arms. my flanges will go straight on to the n/t transfer?? |
|
| Author: | Rusho [ Mon Jun 11, 2012 7:49 pm ] |
| Post subject: | Re: n/t transfer in 96 coily sierra |
The hole centre's are different from NT to WT/Coily |
|
| Author: | fragga [ Mon Jun 11, 2012 7:58 pm ] |
| Post subject: | Re: n/t transfer in 96 coily sierra |
sorry bout all the queastions. so need to find leafy W/T flanges? n is the the mount kit >>>Transfer Lift Mount Kits? |
|
| Author: | zooky08 [ Mon Jun 11, 2012 8:00 pm ] |
| Post subject: | Re: n/t transfer in 96 coily sierra |
Second last product viewtopic.php?f=15&t=15009 |
|
| Author: | Rusho [ Mon Jun 11, 2012 8:03 pm ] |
| Post subject: | Re: n/t transfer in 96 coily sierra |
fragga wrote: sorry bout all the queastions. so need to find leafy W/T flanges? n is the the mount kit >>>Transfer Lift Mount Kits? Yep...and the jack shaft. What he said ^^^^^ |
|
| Author: | Rusho [ Mon Jun 11, 2012 8:03 pm ] |
| Post subject: | Re: n/t transfer in 96 coily sierra |
fragga wrote: sorry bout all the queastions. so need to find leafy W/T flanges? n is the the mount kit >>>Transfer Lift Mount Kits? Yep...and the jack shaft. What he said ^^^^^ |
|
| Author: | fragga [ Mon Jun 11, 2012 8:24 pm ] |
| Post subject: | Re: n/t transfer in 96 coily sierra |
ok thnx for the help. any idea where i could buy jack shaft n w.t flanges? |
|
| Author: | Rusho [ Mon Jun 11, 2012 8:27 pm ] |
| Post subject: | Re: n/t transfer in 96 coily sierra |
fragga wrote: ok thnx for the help. any idea where i could buy jack shaft n w.t flanges? Shaft is reasonably easy to get. WT flanges can be harder. Put a wanted add up and try your luck 
|
|
| Author: | fragga [ Mon Jun 11, 2012 8:32 pm ] |
| Post subject: | Re: n/t transfer in 96 coily sierra |
awsome thnx again' |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|