| auszookers.com https://auszookers.com/forum/ |
|
| Camber bolts, best place to source? https://auszookers.com/forum/viewtopic.php?f=5&t=33453 |
Page 1 of 1 |
| Author: | zook37 [ Sat Jun 16, 2012 2:13 pm ] |
| Post subject: | Camber bolts, best place to source? |
Hi Guys. apologies if this question has been raised a million squillion times before. Where is the best place to grab a set of camber bolts for my GV? Been delaying it for a while, I need a set before I start chewing out the new front tyres!  Did a bit of a search but my laptop is chucking a wobbly.
|
|
| Author: | atari4x4 [ Sat Jun 16, 2012 3:04 pm ] |
| Post subject: | Re: Camber bolts, best place to source? |
Pedders if it's urgent or Bits4Vits if you can wait a bit. |
|
| Author: | shandy92 [ Sat Jun 16, 2012 3:34 pm ] |
| Post subject: | Re: Camber bolts, best place to source? |
atari4x4 wrote: Pedders if it's urgent or Bits4Vits if you can wait a bit.
|
|
| Author: | zook37 [ Sat Jun 16, 2012 3:58 pm ] |
| Post subject: | Re: Camber bolts, best place to source? |
Bits 4 vits it is then.... I refuse to deal with Pedders after a couple of less than inspiring experiences with those idiots. 
|
|
| Author: | caboose [ Sat Jun 16, 2012 6:42 pm ] |
| Post subject: | Re: Camber bolts, best place to source? |
nolathane make them also, you should be able to get them through any one who deals with nolathane. supercheap, repco ect... nolathane |
|
| Author: | dhula [ Sat Jun 16, 2012 9:10 pm ] |
| Post subject: | Re: Camber bolts, best place to source? |
bits4vits or jimnybits cheeper than in Oz even when you include shipping bits4vits took aprox 7 days from time of order to arrival on my doorstep last time but I had some other stuff in the order as well. |
|
| Author: | Built4thrashing [ Sun Jun 17, 2012 3:00 pm ] |
| Post subject: | Re: Camber bolts, best place to source? |
KPD Talk to Dank. he can get them for you and he's a Auszooker too. |
|
| Author: | zook37 [ Sun Jun 17, 2012 4:26 pm ] |
| Post subject: | Re: Camber bolts, best place to source? |
Bits 4 Vits won me over! Ordered for Under $50 landed here in oz. Cheapest I have seen on ebay etc is over $90.00.! |
|
| Author: | britvit [ Sun Jun 17, 2012 4:48 pm ] |
| Post subject: | Re: Camber bolts, best place to source? |
The fella that runs Bits4Vits also runs a country post office so freight is quick and the cheapest possible..... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|