| auszookers.com https://auszookers.com/forum/ |
|
| Which gasket? https://auszookers.com/forum/viewtopic.php?f=5&t=33529 |
Page 1 of 1 |
| Author: | sando [ Tue Jun 19, 2012 5:17 pm ] |
| Post subject: | Which gasket? |
Hi guys, I'm running a g16b in my sierra with g13b sump. I need to replace the sump gasket, do I order the g13b one or g16b? |
|
| Author: | Jackson [ Tue Jun 19, 2012 5:35 pm ] |
| Post subject: | Re: Which gasket? |
Niether, just use gasket goo. Most of them are anyway. |
|
| Author: | want33s [ Tue Jun 19, 2012 6:23 pm ] |
| Post subject: | Re: Which gasket? |
1.3 or 1.6 gasket are same. |
|
| Author: | DMAC [ Tue Jun 19, 2012 6:29 pm ] |
| Post subject: | Re: Which gasket? |
Jackson wrote: Niether, just use gasket goo. Most of them are anyway. X2 when I last tried to source one the guy just grabbed some gasket sealant goo. Working fine so far. |
|
| Author: | sando [ Tue Jun 19, 2012 7:04 pm ] |
| Post subject: | Re: Which gasket? |
Thanks want33s. |
|
| Author: | 303zuke [ Wed Jun 20, 2012 6:17 am ] |
| Post subject: | Re: Which gasket? |
want33s wrote: 1.3 or 1.6 gasket are same. Suzuki G series engines don't have sump gaskets, they use Liquid Sealant from Factory. But you're right in that the bolt pattern is identical (otherwise you wouldn't be able to swap sumps), so if an aftermarket gasket kit includes a sump gasket, then either a 1.3 or 1.6 will fit. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|