auszookers.com :: View topic - tyre size,, skinny spare to match 31"

looking for a tyre to put on the factory spare rim (w/t sierra)
runin 31/10.5/15 on the car but wanted a skinny 15" same hight as the 31,s
amy suggestions?

ROAR99 wrote:

looking for a tyre to put on the factory spare rim (w/t sierra)
runin 31/10.5/15 on the car but wanted a skinny 15" same hight as the 31,s
amy suggestions?

Basically, no. Not unless you consider 9.5" skinny.

You'd be better off sourcing a 16" rim and wacking a 7.50x16 on it. 7.50x16s almost always measure 31" and are very cheap and easy to get.

sideways wrote:

ROAR99 wrote:

looking for a tyre to put on the factory spare rim (w/t sierra)
runin 31/10.5/15 on the car but wanted a skinny 15" same hight as the 31,s
amy suggestions?

Basically, no. Not unless you consider 9.5" skinny.

You'd be better off sourcing a 16" rim and wacking a 7.50x16 on it. 7.50x16s almost always measure 31" and are very cheap and easy to get.

Most 7.50/16s are between 808 and 812 mm, closer to 32". only option on a 15 might be a 700/15 which would be a gay, uber heavy truck tyre.

I have 2 sets of 7.50/16s here (none on rims which would lower them slightly) the Dunlop Road Grippers measure 32.25", have done about 20000km and the Insa Turbos measure 32.75 (retreads) and have done about 1500 HARD LJ kms. Measured the circumferences.

3cyl wrote:

sideways wrote:

ROAR99 wrote:

looking for a tyre to put on the factory spare rim (w/t sierra)
runin 31/10.5/15 on the car but wanted a skinny 15" same hight as the 31,s
amy suggestions?

Basically, no. Not unless you consider 9.5" skinny.

You'd be better off sourcing a 16" rim and wacking a 7.50x16 on it. 7.50x16s almost always measure 31" and are very cheap and easy to get.

Most 7.50/16s are between 808 and 812 mm, closer to 32". only option on a 15 might be a 700/15 which would be a gay, uber heavy truck tyre.

Most of the ones I've measured were barely even 31s, though they were old and worn.

I had a 650x16 truck retread on an LJ rim (measured 28.5x6 and weighed about as much as my 30x9.5 km2s on 15x7s) on the tailgate of my SJ40 for about 2 weeks before substantial cracks formed on both the tub and the tailgate.

sideways wrote:

3cyl wrote:

sideways wrote:

ROAR99 wrote:

looking for a tyre to put on the factory spare rim (w/t sierra)
runin 31/10.5/15 on the car but wanted a skinny 15" same hight as the 31,s
amy suggestions?

Basically, no. Not unless you consider 9.5" skinny.

You'd be better off sourcing a 16" rim and wacking a 7.50x16 on it. 7.50x16s almost always measure 31" and are very cheap and easy to get.

Most 7.50/16s are between 808 and 812 mm, closer to 32". only option on a 15 might be a 700/15 which would be a gay, uber heavy truck tyre.

If you're using it as a spare, and only a spare to get you out of a situation
when you need a spare tyre an inch in diametre won't be a big concern.

Author:	ROAR99 [ Sat Jun 23, 2012 1:37 pm ]
Post subject:	tyre size,, skinny spare to match 31"
looking for a tyre to put on the factory spare rim (w/t sierra) runin 31/10.5/15 on the car but wanted a skinny 15" same hight as the 31,s amy suggestions?

Author:	Matthew [ Sat Jun 23, 2012 1:52 pm ]
Post subject:	Re: tyre size,, skinny spare to match 31"
Not a 15, but 215/85r16 is nice and skinny and not much smaller than a 31.

Author:	sideways [ Sat Jun 23, 2012 1:54 pm ]
Post subject:	Re: tyre size,, skinny spare to match 31"
ROAR99 wrote: looking for a tyre to put on the factory spare rim (w/t sierra) runin 31/10.5/15 on the car but wanted a skinny 15" same hight as the 31,s amy suggestions? Basically, no. Not unless you consider 9.5" skinny. You'd be better off sourcing a 16" rim and wacking a 7.50x16 on it. 7.50x16s almost always measure 31" and are very cheap and easy to get.

Author:	Scrawny [ Sat Jun 23, 2012 2:01 pm ]
Post subject:	Re: tyre size,, skinny spare to match 31"
Just stick a 31 on the standard rim, it'll be alright for a spare

Author:	3cyl [ Sat Jun 23, 2012 4:45 pm ]
Post subject:	Re: tyre size,, skinny spare to match 31"
sideways wrote: ROAR99 wrote: looking for a tyre to put on the factory spare rim (w/t sierra) runin 31/10.5/15 on the car but wanted a skinny 15" same hight as the 31,s amy suggestions? Basically, no. Not unless you consider 9.5" skinny. You'd be better off sourcing a 16" rim and wacking a 7.50x16 on it. 7.50x16s almost always measure 31" and are very cheap and easy to get. Most 7.50/16s are between 808 and 812 mm, closer to 32". only option on a 15 might be a 700/15 which would be a gay, uber heavy truck tyre.

auszookers.com https://auszookers.com/forum/

tyre size,, skinny spare to match 31" https://auszookers.com/forum/viewtopic.php?f=5&t=33613	Page 1 of 1

Author:	sideways [ Sat Jun 23, 2012 5:04 pm ]
Post subject:	Re: tyre size,, skinny spare to match 31"
3cyl wrote: sideways wrote: ROAR99 wrote: looking for a tyre to put on the factory spare rim (w/t sierra) runin 31/10.5/15 on the car but wanted a skinny 15" same hight as the 31,s amy suggestions? Basically, no. Not unless you consider 9.5" skinny. You'd be better off sourcing a 16" rim and wacking a 7.50x16 on it. 7.50x16s almost always measure 31" and are very cheap and easy to get. Most 7.50/16s are between 808 and 812 mm, closer to 32". only option on a 15 might be a 700/15 which would be a gay, uber heavy truck tyre. Most of the ones I've measured were barely even 31s, though they were old and worn. I had a 650x16 truck retread on an LJ rim (measured 28.5x6 and weighed about as much as my 30x9.5 km2s on 15x7s) on the tailgate of my SJ40 for about 2 weeks before substantial cracks formed on both the tub and the tailgate.

Author:	jono165 [ Sat Jun 23, 2012 5:08 pm ]
Post subject:	Re: tyre size,, skinny spare to match 31"
7.00R16 / 700-16 is the perfect size to match a 31" tyre. Just find a 16x4.5" LJ/Stockman rim for it. Try and find on with the lowest load/ply rating to save weight too.

Author:	3cyl [ Sat Jun 23, 2012 5:28 pm ]
Post subject:	Re: tyre size,, skinny spare to match 31"
I have 2 sets of 7.50/16s here (none on rims which would lower them slightly) the Dunlop Road Grippers measure 32.25", have done about 20000km and the Insa Turbos measure 32.75 (retreads) and have done about 1500 HARD LJ kms. Measured the circumferences.

Author:	want33s [ Mon Jun 25, 2012 12:05 pm ]
Post subject:	Re: tyre size,, skinny spare to match 31"
3cyl wrote: I have 2 sets of 7.50/16s here (none on rims which would lower them slightly) the Dunlop Road Grippers measure 32.25", have done about 20000km and the Insa Turbos measure 32.75 (retreads) and have done about 1500 HARD LJ kms. Measured the circumferences. Are the Grippers for sale? How much please?

Author:	Tyron [ Mon Jun 25, 2012 12:45 pm ]
Post subject:	Re: tyre size,, skinny spare to match 31"
sideways wrote: 3cyl wrote: sideways wrote: ROAR99 wrote: looking for a tyre to put on the factory spare rim (w/t sierra) runin 31/10.5/15 on the car but wanted a skinny 15" same hight as the 31,s amy suggestions? Basically, no. Not unless you consider 9.5" skinny. You'd be better off sourcing a 16" rim and wacking a 7.50x16 on it. 7.50x16s almost always measure 31" and are very cheap and easy to get. Most 7.50/16s are between 808 and 812 mm, closer to 32". only option on a 15 might be a 700/15 which would be a gay, uber heavy truck tyre. Most of the ones I've measured were barely even 31s, though they were old and worn. I had a 650x16 truck retread on an LJ rim (measured 28.5x6 and weighed about as much as my 30x9.5 km2s on 15x7s) on the tailgate of my SJ40 for about 2 weeks before substantial cracks formed on both the tub and the tailgate. If you're using it as a spare, and only a spare to get you out of a situation when you need a spare tyre an inch in diametre won't be a big concern.

Author:	ROAR99 [ Mon Jun 25, 2012 9:13 pm ]
Post subject:	Re: tyre size,, skinny spare to match 31"
Tyron wrote: sideways wrote: 3cyl wrote: sideways wrote: ROAR99 wrote: looking for a tyre to put on the factory spare rim (w/t sierra) runin 31/10.5/15 on the car but wanted a skinny 15" same hight as the 31,s amy suggestions? Basically, no. Not unless you consider 9.5" skinny. You'd be better off sourcing a 16" rim and wacking a 7.50x16 on it. 7.50x16s almost always measure 31" and are very cheap and easy to get. Most 7.50/16s are between 808 and 812 mm, closer to 32". only option on a 15 might be a 700/15 which would be a gay, uber heavy truck tyre. Most of the ones I've measured were barely even 31s, though they were old and worn. I had a 650x16 truck retread on an LJ rim (measured 28.5x6 and weighed about as much as my 30x9.5 km2s on 15x7s) on the tailgate of my SJ40 for about 2 weeks before substantial cracks formed on both the tub and the tailgate. If you're using it as a spare, and only a spare to get you out of a situation when you need a spare tyre an inch in diametre won't be a big concern. it will if i need to put it on the rear diff with the mini spool (100% locker) thanks for the imput guys,, i think il chase up a 16'' spare rim

Author:	abclarke [ Mon Jun 25, 2012 9:15 pm ]
Post subject:	Re: tyre size,, skinny spare to match 31"
Good info guys! I wanted to find something skinny to put on the back door of the hard top seeing as the bigger spare wants to kinda make the door come off... Welling coming off anyway

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/