| auszookers.com https://auszookers.com/forum/ |
|
| Vitara speed vs rpm https://auszookers.com/forum/viewtopic.php?f=5&t=33645 |
Page 1 of 1 |
| Author: | burls [ Sun Jun 24, 2012 9:02 pm ] |
| Post subject: | Vitara speed vs rpm |
Needs some help with some figures for my build. Confirm 93 Vit LWB on standard wheels RPM @ 100 is 3200 RPM @ 60 is ......... |
|
| Author: | JrZook [ Sun Jun 24, 2012 9:19 pm ] |
| Post subject: | Re: Vitara speed vs rpm |
(3200/100)*60 = 1920RPM in the same gear |
|
| Author: | burls [ Mon Jun 25, 2012 12:41 pm ] |
| Post subject: | Re: Vitara speed vs rpm |
Thanks JR now to work the ratios |
|
| Author: | tanshi [ Mon Jun 25, 2012 3:12 pm ] |
| Post subject: | Re: Vitara speed vs rpm |
by my calcs 100 in a vit should be 3300 at 100 in 5th so with your vitara 1.6 and gearbox. on WT diffs with 3.7 diffs if you use a 4.9 : 1 transfer your looking at 3298 at 100 in 5th gearing sorted |
|
| Author: | tanshi [ Mon Jun 25, 2012 3:13 pm ] |
| Post subject: | Re: Vitara speed vs rpm |
thats on a 31 inch tyre on 29s like you were talking about it makes the road revving a bit too high, even if you drop down to 4.1 transfer gears its still too high, this is where you find issues |
|
| Author: | JrZook [ Mon Jun 25, 2012 3:41 pm ] |
| Post subject: | Re: Vitara speed vs rpm |
tanshi wrote: 3298 at 100 in 5th The 1.6 is much more happier @ ~3600 |
|
| Author: | tanshi [ Mon Jun 25, 2012 4:19 pm ] |
| Post subject: | Re: Vitara speed vs rpm |
i used to run mine at 3400 happily, but for every day driving i wouldnt run it much higher. |
|
| Author: | Gwagensteve [ Mon Jun 25, 2012 5:19 pm ] |
| Post subject: | Re: Vitara speed vs rpm |
Mine runs 3700 and seems fine at that. I'm sure it could run lower, but I like the gearing off road with 6.4's and 5.12's and a true 35" tyre. Steve. |
|
| Author: | JrZook [ Mon Jun 25, 2012 6:52 pm ] |
| Post subject: | Re: Vitara speed vs rpm |
tanshi wrote: but for every day driving i wouldnt run it much higher. Interested to hear your reasoning on this |
|
| Author: | burls [ Mon Jun 25, 2012 7:55 pm ] |
| Post subject: | Re: Vitara speed vs rpm |
Thanks guys. I was going through all the ratios last night and could only get 4.16's to keep the range at 100@3200 but if you recon it would be better a bit higher then maybe 4.9's will work. I've also decided to go 31 for the road and 33 off so if your right Tanshi its time to go shopping for gears and a few other goodies found this if anybody's interested http://www.grimmjeeper.com/metric_gears.html |
|
| Author: | JrZook [ Tue Jun 26, 2012 10:02 am ] |
| Post subject: | Re: Vitara speed vs rpm |
I daily a 1.6 on 30's and go on yearly trips upto Cairns and back. I run 4.9's and 3.7 diffs which brings me to around 3.5-3.6krpm at a true 100. Stock sierra gearing and 30's it was pushing 3100 @ 100 in 5th and it required a lot of throttle input to actually make something happen. You will probs find that the vits were geared that way to try and reduce NVH. Peak torque on the g16 is up around 4000RPM. Peak torque is also where the engine is most efficient which I would consider being a daily that will be used to cruise @ 100-110KPH |
|
| Author: | burls [ Tue Jun 26, 2012 12:02 pm ] |
| Post subject: | Re: Vitara speed vs rpm |
Using the grimmjeeper I got 100k @ 3500 using the lepayne I got 100 k @ 3400 Using .86 (vit gearbox) 1.634 (4.9 transfer gears in hi) 3.7 (WT diffs) and 31 tires To me these fig are a bit hi but from what your saying would be better anyway http://www.lepayne.com/gears.html |
|
| Author: | got_bar_work [ Wed Jun 27, 2012 9:45 am ] |
| Post subject: | Re: Vitara speed vs rpm |
U should be aiming at at least 3600 at 110 My vit sits around 3200 and it sucks |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|