| auszookers.com https://auszookers.com/forum/ |
|
| reduction gears and slip yoke eliminators https://auszookers.com/forum/viewtopic.php?f=5&t=33708 |
Page 1 of 1 |
| Author: | wombat178 [ Wed Jun 27, 2012 11:23 am ] |
| Post subject: | reduction gears and slip yoke eliminators |
having trouble finding definate info as to the availability of these for the v6 vitaras. Mines a 96 model manual estate wagon i have found these isems from low range offroad etc but can not find any info as to weather they will fit my model.any ideas????? |
|
| Author: | Fatzook [ Wed Jun 27, 2012 11:32 am ] |
| Post subject: | Re: reduction gears and slip yoke eliminators |
99% sure they will fit. |
|
| Author: | wombat178 [ Thu Jun 28, 2012 5:34 pm ] |
| Post subject: | Re: reduction gears and slip yoke eliminators |
Dont suppose you would know what the highest reduction i can get for them is?? |
|
| Author: | Gwagensteve [ Thu Jun 28, 2012 5:43 pm ] |
| Post subject: | Re: reduction gears and slip yoke eliminators |
Isn't there only one set? - 4.24:1 Trust me, these are plenty low. The amount of low range reduction is comparable to a sierra with 7:1 transfer gears, because high range is direct in a vitara case, so if you are geared properly for high range, the low range is hell low. Steve. |
|
| Author: | wombat178 [ Fri Jun 29, 2012 9:12 pm ] |
| Post subject: | Re: reduction gears and slip yoke eliminators |
Awsome thanks have been having trouble finding this info was getting to the point imwas nearly gonna yank the lot and put a commodore v6 and auto in it but this is giving me some hope thanks |
|
| Author: | Gwagensteve [ Fri Jun 29, 2012 10:27 pm ] |
| Post subject: | Re: reduction gears and slip yoke eliminators |
Putting a commodore v6 in anything is a sure way of loosing hope. Even a commodore. Steve. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|