| auszookers.com https://auszookers.com/forum/ |
|
| Jimny Clutch https://auszookers.com/forum/viewtopic.php?f=5&t=33741 |
Page 1 of 1 |
| Author: | JuniorJoel [ Thu Jun 28, 2012 6:44 pm ] |
| Post subject: | Jimny Clutch |
Hey guys, Just wondering if anyone knows the torque specs (Foot pounds or Newton meters) for the Suzuki jimmy Flywheel and clutch. Or, if you guys just do them up tight. Putting my new clutch in this weekend so any specs/tips or hints would be helpful. Already have the old one out. Thanks, Joel |
|
| Author: | Scrawny [ Thu Jun 28, 2012 6:56 pm ] |
| Post subject: | Re: Jimny Clutch |
I've always just used thread lock and a rattle gun on the flywheel bolts. Clutch cover bolts just do up tight with your 3/8 rachet. |
|
| Author: | Jester [ Thu Jun 28, 2012 7:37 pm ] |
| Post subject: | Re: Jimny Clutch |
Scrawn wrote: I've always just used thread lock and a rattle gun on the flywheel bolts. Clutch cover bolts just do up tight with your 3/8 rachet. that works |
|
| Author: | Bugsta [ Thu Jun 28, 2012 8:29 pm ] |
| Post subject: | Re: Jimny Clutch |
Jester wrote: Scrawn wrote: I've always just used thread lock and a rattle gun on the flywheel bolts. Clutch cover bolts just do up tight with your 3/8 rachet. that works |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|