| auszookers.com https://auszookers.com/forum/ |
|
| suzuki jimny differential preload settings https://auszookers.com/forum/viewtopic.php?f=5&t=33908 |
Page 1 of 1 |
| Author: | TryHard [ Thu Jul 05, 2012 8:36 pm ] |
| Post subject: | suzuki jimny differential preload settings |
Anyone know any good websites or know the specs for suzuki jimny differential preload trying to rebuild a rear diff but its a bit hard without the specs anyone know it ? |
|
| Author: | smiffkid [ Thu Jul 05, 2012 10:35 pm ] |
| Post subject: | Re: suzuki jimny differential preload settings |
Same as Sierra. Other then that I not know |
|
| Author: | want33s [ Sat Jul 07, 2012 5:56 pm ] |
| Post subject: | Re: suzuki jimny differential preload settings |
Wind the crownwheel side adjuster in till there is ZERO lash. Wind the other side adjuster in until you have desired lash (EG 10 thou). Preload will be so close to perfect it isn't funny. |
|
| Author: | TryHard [ Sun Jul 08, 2012 10:19 pm ] |
| Post subject: | Re: suzuki jimny differential preload settings |
want33s wrote: Wind the crownwheel side adjuster in till there is ZERO lash. Wind the other side adjuster in until you have desired lash (EG 10 thou). Preload will be so close to perfect it isn't funny. What about pinion Preload ? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|