| auszookers.com https://auszookers.com/forum/ |
|
| Getting battery light to go out with 110amp alt https://auszookers.com/forum/viewtopic.php?f=5&t=34092 |
Page 1 of 1 |
| Author: | Rossco [ Thu Jul 12, 2012 10:35 am ] |
| Post subject: | Getting battery light to go out with 110amp alt |
my battery light keeps staying on when my g16b in a sierra is running. the charge voltage is 19.2V which is way high. I have hooked the sense wire to a relay which I have checked and rechecked that everything is on the right terminals. when I join the alt sense wire and sierra loom voltage regulator wire off of the relay it still charges at 19.2V. when the engine is running and I just test the alt sense wire its reading 6.1V, (this is disconnected from the relay). I feel like I have exhausted my options, is there something I'm doing wrong here? |
|
| Author: | JrZook [ Thu Jul 12, 2012 2:03 pm ] |
| Post subject: | Re: gatting battery light to go out with 110amp alt |
Regulator in the alt not fubar? |
|
| Author: | Blakey [ Thu Jul 12, 2012 2:26 pm ] |
| Post subject: | Re: gatting battery light to go out with 110amp alt |
i would agree sounds like your regulator isnt regulating any more. is there any AC componant to your output? |
|
| Author: | Rossco [ Thu Jul 12, 2012 3:08 pm ] |
| Post subject: | Re: gatting battery light to go out with 110amp alt |
I think your right. I pulled it out and put the vit alt back in and it was charging at 14.4V. thanks guys. O and on a side note. I couldn't get my handbrake light to turn off either. disconnected everything that would power it. as soon as I put the working alt in it turned off. maybe a sign that your alt is stuffed in the future. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|