| auszookers.com https://auszookers.com/forum/ |
|
| 1.6 into 1994 1ltr maruti ute https://auszookers.com/forum/viewtopic.php?f=5&t=3412 |
Page 1 of 1 |
| Author: | reallyuted [ Wed Nov 26, 2008 2:50 am ] |
| Post subject: | 1.6 into 1994 1ltr maruti ute |
I have read other posts on the 1.6 into a 1.3 but i own a 1ltr! I understand that the engine mounts need to be modified and im unsure of the gearbox mounts. but i am wondering about the 1ltr transfer case are they the same as the 1.3 apart from flanges or are ratios different? if they are which one is better and why? also which is better to use the vitara box or the 1.3 and why? and will the 1ltr drive shaft fit the 1.3 or vit box? cheers wayne |
|
| Author: | Mike [ Wed Nov 26, 2008 2:52 am ] |
| Post subject: | Re: 1.6 into 1994 1ltr maruti ute |
you'd be better off keeping the 1litre transfer it has lower gearing than a 1.3 transfer |
|
| Author: | joeblow [ Wed Nov 26, 2008 3:11 am ] |
| Post subject: | Re: 1.6 into 1994 1ltr maruti ute |
yes you will need to modify engine mounts, though if you use a sierra 5 speed you can keep the original crossmember. my preference is for the vit manual or auto as these are tough as nails and will give a little extra torque. the maruti transfer is the same as a 1.3 EXCEPT it has 1 litre gearing. and if its a late model widetrack maruti it has 4.1 diffs, bigger cv's....yes bigger....and will accept airlockers. |
|
| Author: | reallyuted [ Wed Nov 26, 2008 3:25 am ] |
| Post subject: | Re: 1.6 into 1994 1ltr maruti ute |
sweet air lockers are on the cards for mid next year cheers so if i use the vit motor and 5peed do i need a modified drive shaft? thanks again guys |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|