| auszookers.com https://auszookers.com/forum/ |
|
| WT and NT diff need help https://auszookers.com/forum/viewtopic.php?f=5&t=34336 |
Page 1 of 1 |
| Author: | BRAD [ Fri Jul 20, 2012 7:10 am ] |
| Post subject: | WT and NT diff need help |
Hey all, Going to the wreckers on the weekend and i need some hslp picking out the difference between the nt and wt diff, just in case the wrecker guy tells me the wrong thing cheers |
|
| Author: | shep [ Fri Jul 20, 2012 7:33 am ] |
| Post subject: | Re: WT and NT diff need help |
Count the teeth on the crown wheel. 41 is wt 43 is nt( from memory) |
|
| Author: | want33s [ Fri Jul 20, 2012 7:38 am ] |
| Post subject: | Re: WT and NT diff need help |
You want diff centres or diff housings? Centres: NT & WT look identical except for the drive flange. NT has 8mm holes.... WT has 10mm holes. Housings: Front; NT front has the drivers side perch halfway up the rounded part of the pumpkin. WT has the drivers side perch on the flat of the axle tube. Housings: Rear; NT has no provision for handbrake in the drums also has no handbrake cable mounts across the axle tubes. WT does have handbrake in the drums and has cable mounting lugs. |
|
| Author: | BRAD [ Fri Jul 20, 2012 5:27 pm ] |
| Post subject: | Re: WT and NT diff need help |
Thanks guys. Im after the whole front diff. And the lenght is obviously different from brake to brake? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|