| auszookers.com https://auszookers.com/forum/ |
|
| difference g13a and g13b https://auszookers.com/forum/viewtopic.php?f=5&t=34374 |
Page 1 of 1 |
| Author: | haurp00ned [ Sat Jul 21, 2012 9:04 pm ] |
| Post subject: | difference g13a and g13b |
hi all i was just wondering what is the difference in the g13a engine and the g13b? and how to tell the difference between them? |
|
| Author: | fordem [ Sat Jul 21, 2012 11:25 pm ] |
| Post subject: | Re: difference g13a and g13b |
G13B is 1298cc, G13A is 1324cc (longer stroke, taller block) and the block will be marked. The G13A will be 8v SOHC, the G13B can be 8 or 16V, SOHC or DOHC. |
|
| Author: | alien [ Sat Jul 21, 2012 11:54 pm ] |
| Post subject: | Re: difference g13a and g13b |
There's really 4 kinds of g13... G13a - SOHC 8v (NT sierra, swift, barina) 1324cc G13b - DOHC 16v (swift gti) G13ba - SOHC 8v (swift, barina, WT sierra) 1298cc G13bb - SOHC 16v (jimny, swift) Theyre all pretty different! You can tell what is what by the engine number - it will start with the engine type, ie: G13A.... or G13BA.... |
|
| Author: | whincup [ Sat Jul 21, 2012 11:57 pm ] |
| Post subject: | Re: difference g13a and g13b |
how to tell the difference, looking at the left (passenger) side of the block, just in front of where the transmission attaches, there will be either G13A or G13B stamped on it... and you will be able to tell the difference between the SOHC and DOHC, if not, google images SOHC and DOHC, you'll pick it up easy after that. |
|
| Author: | haurp00ned [ Sun Jul 22, 2012 8:29 am ] |
| Post subject: | Re: difference g13a and g13b |
arighty then cheers for the info, another stupid question, but im still learning about this shorta shit haha, so i have a g13ba wt sierra if i was wonting to put a g13a or a g13b engine into how much and what would i have to change to make them fit? cheers. |
|
| Author: | alien [ Sun Jul 22, 2012 10:09 am ] |
| Post subject: | Re: difference g13a and g13b |
g13a - there's no benefit, its the same motor really. g13b - search "GTI engine" as that's what theyre commonly referred to. IMO - if you're keen on more power, just plonk a 1.6 (g16) in there - you have the choice of carby or efi - go EFI if you can. |
|
| Author: | haurp00ned [ Sun Jul 22, 2012 11:38 am ] |
| Post subject: | Re: difference g13a and g13b |
Alrighty then to put a g16 In it what would I have to change and how difficult would it be to do your self?. |
|
| Author: | neofitou [ Sun Jul 22, 2012 11:50 am ] |
| Post subject: | Re: difference g13a and g13b |
I could do it my self, Alien could do it himself, but Im not sure you can just yet. If your just learning, its a BIG job mostly because of wiring and fuel, unless you put in a carby G16 (dont). Start on small projects before an engine change and work your way up to it,. ;D |
|
| Author: | haurp00ned [ Sun Jul 22, 2012 11:59 am ] |
| Post subject: | Re: difference g13a and g13b |
The g13 that I have in my Sierra is stuffed and on its way out. |
|
| Author: | alien [ Sun Jul 22, 2012 12:02 pm ] |
| Post subject: | Re: difference g13a and g13b |
neofitou wrote: Alien could never do it himself, cos he's too lazy to learn how, and would rather just pay someone who knows what theyre doing to do it fixed =) |
|
| Author: | 2stroker [ Sun Jul 22, 2012 12:56 pm ] |
| Post subject: | Re: difference g13a and g13b |
Neofitou say don't fit a carbie 1600, I would be carefull who you take advice from. |
|
| Author: | haurp00ned [ Sun Jul 22, 2012 4:29 pm ] |
| Post subject: | Re: difference g13a and g13b |
okay then, how much and what would i have to change to put a carbie 1600 in my wt sierra? |
|
| Author: | KEENSY85 [ Sun Jul 22, 2012 5:55 pm ] |
| Post subject: | Re: difference g13a and g13b |
fordem wrote: G13B is 1298cc, G13A is 1324cc (longer stroke, taller block) and the block will be marked. The G13A will be 8v SOHC, the G13B can be 8 or 16V, SOHC or DOHC. I'm pretty shure that the block is not actually taller, the crank is molded different it is not hollow the 1298(g13b&g13ba) has a different moulding of the crank it is hollow and is better balanced,the cams are also different ,and the g13b was used as a gti block but also as a 8v combination |
|
| Author: | shep [ Sun Jul 22, 2012 6:31 pm ] |
| Post subject: | Re: difference g13a and g13b |
haurp00ned wrote: okay then, how much and what would i have to change to put a carbie 1600 in my wt sierra? BenT kit and a plug on the vit carby changed viewtopic.php?f=15&t=15009 |
|
| Author: | haurp00ned [ Sun Jul 22, 2012 7:04 pm ] |
| Post subject: | Re: difference g13a and g13b |
so what all i would need is a bent kit? and aso wouldnt i need to change al the wiring and what not? |
|
| Author: | shep [ Sun Jul 22, 2012 7:28 pm ] |
| Post subject: | Re: difference g13a and g13b |
Most stuff plugs in exept for the plug to the carby. I did the conversion in one day and was very happy With the result. |
|
| Author: | zukmeista [ Mon Jul 23, 2012 5:22 am ] |
| Post subject: | Re: difference g13a and g13b |
AND the sump has to be changed to a sierra one and the oil pickup needds to be cut and welded. |
|
| Author: | shep [ Mon Jul 23, 2012 6:05 am ] |
| Post subject: | Re: difference g13a and g13b |
zukmeista wrote: AND the sump has to be changed to a sierra one and the oil pickup needds to be cut and welded. I didn't change the sump on mine and it didn't come close to the diff  however my front diff is around 60mm forward from stock.I won't be changing the sump on the G16b that I am putting into my lwb either |
|
| Author: | zukmeista [ Mon Jul 23, 2012 7:19 am ] |
| Post subject: | Re: difference g13a and g13b |
Yes, but that's cos you're really special 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|