Might be a good idea to buy body mounting bushes from LROR though
| auszookers.com https://auszookers.com/forum/ |
|
| Body Lift https://auszookers.com/forum/viewtopic.php?f=5&t=34395 |
Page 1 of 1 |
| Author: | jackoliveshere [ Sun Jul 22, 2012 5:47 pm ] |
| Post subject: | Body Lift |
So i might need to do a body lift to my 92 sj70 sierra to fit in the G16A i recently purchased (i currently just have 2" suspension) im guessing this kit from lowrangeoffroad is legit and will be roadworthy in aus? http://www.lowrangeoffroad.com/index.php/sky-1-and-2-inch-body-lifts.html it is ridiculously cheaper then buying a kit from aus stores. |
|
| Author: | Scrawny [ Sun Jul 22, 2012 5:52 pm ] |
| Post subject: | Re: Body Lift |
Don't forget to add postage to that price I'd suggest local stuff viewtopic.php?f=15&t=15518 viewtopic.php?f=15&t=13126 |
|
| Author: | just_cruizin [ Sun Jul 22, 2012 5:57 pm ] |
| Post subject: | Re: Body Lift |
The Lowrange kits are actually non compliant in most states as the blocks aren't solid |
|
| Author: | abclarke [ Sun Jul 22, 2012 6:05 pm ] |
| Post subject: | Re: Body Lift |
Scrawn wrote: Great bit of gear! Couldnt suggest it more. Comes with great fitting instructions too. |
|
| Author: | jackoliveshere [ Sun Jul 22, 2012 6:45 pm ] |
| Post subject: | Re: Body Lift |
awesome! i dont remember ever lookin at that part of the forums. thanks for the help! |
|
| Author: | Wazz [ Sun Jul 22, 2012 8:30 pm ] |
| Post subject: | Re: Body Lift |
Might be a good idea to buy body mounting bushes from LROR though
|
|
| Author: | jackoliveshere [ Sun Jul 22, 2012 8:36 pm ] |
| Post subject: | Re: Body Lift |
Can you link me to the ones u reccomend |
|
| Author: | Wazz [ Sun Jul 22, 2012 8:41 pm ] |
| Post subject: | Re: Body Lift |
Only a suggestion, i know my ones are currently pretty hammered. You can pay a shitload and get the whole OEM kit or they do polyurethane ones aswell. http://www.lowrangeoffroad.com/index.ph ... t-kit.html or http://www.lowrangeoffroad.com/index.ph ... t-kit.html But you wont use the crush tubes and washers anyway. |
|
| Author: | Daves4wd [ Sun Jul 22, 2012 9:10 pm ] |
| Post subject: | Re: Body Lift |
You shouldnt need run a body lift for a g16a you change the bolt coming out of the center of the carb to the one out of the Sierra and run the Sierra hat and all should be good |
|
| Author: | just_cruizin [ Sun Jul 22, 2012 9:22 pm ] |
| Post subject: | Re: Body Lift |
I can supply body rubbers as well |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|