| auszookers.com https://auszookers.com/forum/ |
|
| just bought a suzuki sierra, concerned about gearing https://auszookers.com/forum/viewtopic.php?f=5&t=34509 |
Page 1 of 1 |
| Author: | venny [ Thu Jul 26, 2012 10:18 pm ] |
| Post subject: | just bought a suzuki sierra, concerned about gearing |
hi i bought a suzuki sierra 1991 model (1.3l) and it has 31 inch mud tyres on it. i am looking to get it to go alot slower for some offroad work as low range is a bit too fast sometimes and have been told that putting a 1.0L transfer case is a good way to achieve this. im basically just looking for some opinions and advice on this modification. i have the transfer case and also front and rear diffs which i was also planning to put in to lower the gearing. how would this affect my topspeed as well? ill probly have a ton more questions hopefully this will help some people out. oh yeah this is also largely because i dont want to destroy my clutch as well. |
|
| Author: | Fatzook [ Thu Jul 26, 2012 10:58 pm ] |
| Post subject: | Re: just bought a suzuki sierra, concerned about gearing |
Hey mate. Just go straight for 4.9 or 6.5 transfer gears and leave the diffs alone. Its a tried and true solution. |
|
| Author: | monley [ Thu Jul 26, 2012 11:09 pm ] |
| Post subject: | Re: just bought a suzuki sierra, concerned about gearing |
Fatzook wrote: Hey mate. Just go straight for 4.9 or 6.5 transfer gears and leave the diffs alone. Its a tried and true solution. X2 Only need to change the diff ratios when you can't get enough high range reduction from the t-case gears. |
|
| Author: | alien [ Thu Jul 26, 2012 11:11 pm ] |
| Post subject: | Re: just bought a suzuki sierra, concerned about gearing |
is this ridzilla's sierra? |
|
| Author: | venny [ Fri Jul 27, 2012 3:16 pm ] |
| Post subject: | Re: just bought a suzuki sierra, concerned about gearing |
hey not sure who ridzilla is sorry dude maybe i bought it off him fatzook i have a welded diff and need a rego inspection so i need it removed monley i guess the transfer case would be enough. how would it go on the highway if i did both though? |
|
| Author: | suzukikid [ Fri Jul 27, 2012 3:22 pm ] |
| Post subject: | Re: just bought a suzuki sierra, concerned about gearing |
just go 6.5s and ya done bloke....see if ya get picked up on rear diff....if ya do put ya rear one in and get the roady then put the welded back in.... ya cant go wrong |
|
| Author: | monley [ Fri Jul 27, 2012 3:38 pm ] |
| Post subject: | Re: just bought a suzuki sierra, concerned about gearing |
venny wrote: hey not sure who ridzilla is sorry dude maybe i bought it off him fatzook i have a welded diff and need a rego inspection so i need it removed monley i guess the transfer case would be enough. how would it go on the highway if i did both though? It would be doing more rpm @100kph than what it needs to be doing. You may need to do both if you went 33s+ but 6.5s and 31s it will be fine on road. What sort of terrain do you drive? |
|
| Author: | tanshi [ Fri Jul 27, 2012 4:13 pm ] |
| Post subject: | Re: just bought a suzuki sierra, concerned about gearing |
at 100 on 31s you will be doing about 3600 you dont need to go any lower |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|