auszookers.com
https://auszookers.com/forum/

Belt wrap on engine pulleys
https://auszookers.com/forum/viewtopic.php?f=5&t=3467		 Page 1 of 1
Author:  Damo [ Wed Dec 03, 2008 3:15 am ]
Post subject:  Belt wrap on engine pulleys
This is a split topic. The post you are reading refers to this post

You might not have enough belt wrap around the A/C pulley, it's prolly gonna slip on that under load. You might be able to put a little idler in between the A/C pump and the P/S pump if you have problems.
Author:  jimbo_jones [ Wed Dec 03, 2008 4:02 am ]
Post subject:  Re: a zook on 37's
Damo wrote:
You might not have enough belt wrap around the A/C pulley, it's prolly gonna slip on that under load. You might be able to put a little idler in between the A/C pump and the P/S pump if you have problems.


thanks damo its a work in progress if it needs it I'll put one in
Author:  Damo [ Wed Dec 03, 2008 10:13 am ]
Post subject:  Re: a zook on 37's
jimbo_jones wrote:
Damo wrote:
You might not have enough belt wrap around the A/C pulley, it's prolly gonna slip on that under load. You might be able to put a little idler in between the A/C pump and the P/S pump if you have problems.


thanks damo its a work in progress if it needs it I'll put one in


Aren't they all :wink:

Do you still want those shock towers? I PM'd you but the msg hasn't left my outbox yet. I got the towers boxed up ready to go.
Author:  Hybrid [ Wed Dec 03, 2008 1:05 pm ]
Post subject:  Re: a zook on 37's
Yeah the crank and power steer pulleys look ok but that AC compressor hasn't got anywhere near enough arc of contact. I think I have a link here on how to calculate how much you need if you want it. I found it when I was having the same supercharger dilemmas
Author:  Hybrid [ Wed Dec 03, 2008 1:06 pm ]
Post subject:  Re: a zook on 37's
Here it is anyway http://www.bacharach-training.com/norm/arc.htm
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/