| auszookers.com https://auszookers.com/forum/ |
|
| braking = engine stall https://auszookers.com/forum/viewtopic.php?f=5&t=34706 |
Page 1 of 1 |
| Author: | jonfromhamilton [ Fri Aug 03, 2012 6:00 pm ] |
| Post subject: | braking = engine stall |
So I have noticed the revs fall when I press my foot on the brake and upon further investigation (pumping the brake) the engine dies down and stalls out comparitive to how much i pump the brake. I assume this is a problem between the brake booster and the vaccum in the engine but this is where it gets beyond me. ideas ? |
|
| Author: | want33s [ Fri Aug 03, 2012 7:07 pm ] |
| Post subject: | Re: braking = engine stall |
Probably a split diaphragm in the booster. Replace it or have it rebuilt. |
|
| Author: | abclarke [ Fri Aug 03, 2012 7:29 pm ] |
| Post subject: | Re: braking = engine stall |
Carby 1.3? |
|
| Author: | Zook_Fan [ Fri Aug 03, 2012 8:00 pm ] |
| Post subject: | Re: braking = engine stall |
When I installed my G16a I had the same problem in my sierra. Quite annoying in a rally when you jump on the brakes and the cars stalls |
|
| Author: | christover1 [ Fri Aug 03, 2012 9:26 pm ] |
| Post subject: | Re: braking = engine stall |
You may have split a hose during body lift. There is a valve in the booster, or in the line, that controls the vacuum. Was the problem with my Vit, but it had different symptoms. |
|
| Author: | jonfromhamilton [ Fri Aug 03, 2012 9:50 pm ] |
| Post subject: | Re: braking = engine stall |
Thanks chris, i will have to have a check of the hose tomorrow but I still have to get that extra filter before the carby like you suggested. I think the fact my carby is piss-weak is part of any problem with my car. |
|
| Author: | KEENSY85 [ Sat Aug 04, 2012 4:48 am ] |
| Post subject: | Re: braking = engine stall |
iv had the same problem ,same fix as zookfan |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|