scored a wt transfer for my coily, its in rough shape and im trying to pull it apart im stuck at removing the speedo cable
I've tried pulling, spining the sleeve, hit it a few time's and no good
| auszookers.com https://auszookers.com/forum/ |
|
| speedo cable removal https://auszookers.com/forum/viewtopic.php?f=5&t=34904 |
Page 1 of 1 |
| Author: | dude! [ Sun Aug 12, 2012 6:36 pm ] |
| Post subject: | speedo cable removal |
scored a wt transfer for my coily, its in rough shape and im trying to pull it apart im stuck at removing the speedo cable I've tried pulling, spining the sleeve, hit it a few time's and no good |
|
| Author: | want33s [ Sun Aug 12, 2012 7:22 pm ] |
| Post subject: | Re: speedo cable removal |
Scrub the case where the cable goes in with a wire brush.. Get rid of all that built up crap and then soak it in CRC or WD or similar overnight. Then attach Vise Grips to the steel cable end and tap with a hammer. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|