auszookers.com
https://auszookers.com/forum/

Ripped sill off the jimny today. Anyone else done that?
https://auszookers.com/forum/viewtopic.php?f=5&t=34911		 Page 1 of 1
Author:  Dr_Snapid [ Sun Aug 12, 2012 7:41 pm ]
Post subject:  Ripped sill off the jimny today. Anyone else done that?
I managed to get the drivers side sill ripped off while going up a clay hill when out wheeling today. It got bend way under the car and somehow got into the rear coil and got mangled. GU behind me radioed to say i had a log sticking out but no, it was my mangled sill!

Has anyone else ripped off their sills?

I probably wont replace it, might try make up some sliders....
Author:  alien [ Sun Aug 12, 2012 7:53 pm ]
Post subject:  Re: Ripped sill off the jimny today. Anyone else done that?
my uncle used to eject his off all the time - if he landed the sill on a rock etc it'd blow the clips and fall off along with the rear flare bit as well. lol

he bought new clips once or twice then just gave up and left them off.

it'd be good if you could find some body coloured square plugs to fill the clip holes though.
Author:  zooky08 [ Sun Aug 12, 2012 8:09 pm ]
Post subject:  Re: Ripped sill off the jimny today. Anyone else done that?
yep rip mine off all the time. there held iinto place with shit plastic clips.
i run with out them any more. just make some sliders up to replace them
Author:  11acb [ Sun Aug 12, 2012 8:41 pm ]
Post subject:  Re: Ripped sill off the jimny today. Anyone else done that?
got any pics of how it looks with out them?
Author:  Dr_Snapid [ Sun Aug 12, 2012 9:21 pm ]
Post subject:  Re: Ripped sill off the jimny today. Anyone else done that?
I'll take pics in the morning of mine but it will be so muddy LOL Maybe we should see pics of Zooky08 instead
Author:  monley [ Sun Aug 12, 2012 10:55 pm ]
Post subject:  Re: Ripped sill off the jimny today. Anyone else done that?
Image
Image

Image

No plastic
Author:  Dr_Snapid [ Mon Aug 13, 2012 6:35 am ]
Post subject:  Re: Ripped sill off the jimny today. Anyone else done that?
Thats great Monley, did you make your sliders?
Author:  monley [ Mon Aug 13, 2012 6:44 am ]
Post subject:  Re: Ripped sill off the jimny today. Anyone else done that?
Dr_Snapid wrote:
Thats great Monley, did you make your sliders?

Yep

http://www.auszookers.com/forum/viewtop ... 14&t=29326
Author:  bigdogdazza [ Mon Aug 13, 2012 8:00 am ]
Post subject:  Re: Ripped sill off the jimny today. Anyone else done that?
Lol I have ripped both side sills off before and both front flares! Lots of sikaflex hold them on and have even got self tapping screws in front flares now! Fit rock sliders and lift kit get that car off the ground then your dramas will disapear. I am not to concerned with the looks of my jimny as just about every panel has a small dent or two, and it will be my sons first car as soon as he gets his L plates so the self tappers are doing the job they need to. Definitely not a show car lol!
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/