hooki wrote:
also, who sells drive shaft spacers?
"4WD USA" in Perth sell them mate
| auszookers.com https://auszookers.com/forum/ |
|
| moving diff forward https://auszookers.com/forum/viewtopic.php?f=5&t=3507 |
Page 1 of 1 |
| Author: | hooki [ Mon Dec 08, 2008 9:45 am ] |
| Post subject: | moving diff forward |
hi guys, will be installing the suspension in the car some time this week. I'm doing the 1/2 ruf and as a result i will have to move the diff forward. I think i have an idea about how to go about doing it but was just wondering if anyone had some photos of the actual drilling of the perch and other parts. |
|
| Author: | Damo [ Mon Dec 08, 2008 8:09 pm ] |
| Post subject: | Re: moving diff forward |
hooki wrote: hi guys,
will be installing the suspension in the car some time this week. I'm doing the 1/2 ruf and as a result i will have to move the diff forward. I think i have an idea about how to go about doing it but was just wondering if anyone had some photos of the actual drilling of the perch and other parts. As a matter of fact I do! Link to my members thread here. You don't need a drill press though, I have done it before with a hand drill. It's probably best if you step up gradually if doing it with a hand drill. If you try and do it all in one hit it will most likely get your drill bit too hot and it will lose it's edge. It could also catch, which could stall the drill, or if your drill has enough torque rip your hand around and break your wrist! Just go steady and you'll be OK. |
|
| Author: | hooki [ Mon Dec 08, 2008 10:26 pm ] |
| Post subject: | Re: moving diff forward |
cheers damo. will i be able to do it without removing the diff like you have done? |
|
| Author: | Damo [ Tue Dec 09, 2008 12:46 am ] |
| Post subject: | Re: moving diff forward |
hooki wrote: cheers damo. will i be able to do it without removing the diff like you have done?
Yeah you should be able to. |
|
| Author: | hooki [ Fri Dec 12, 2008 8:52 pm ] |
| Post subject: | Re: moving diff forward |
ok, i'v moved the diff forward and all the suspension is in. Just wondering if i should get a drive shaft spacer as the spline in the shaft has come out heaps? |
|
| Author: | hooki [ Fri Dec 12, 2008 9:00 pm ] |
| Post subject: | Re: moving diff forward |
heres a pic. |
|
| Author: | hooki [ Fri Dec 12, 2008 9:00 pm ] |
| Post subject: | Re: moving diff forward |
also, who sells drive shaft spacers? |
|
| Author: | Built4thrashing [ Fri Dec 12, 2008 11:58 pm ] |
| Post subject: | Re: moving diff forward |
def get ya self a spacer. about the same size as how far you moved the diff forward |
|
| Author: | Bruce [ Sat Dec 13, 2008 12:18 pm ] |
| Post subject: | Re: moving diff forward |
hooki wrote: also, who sells drive shaft spacers?
"4WD USA" in Perth sell them mate
|
|
| Author: | zookernator [ Sat Dec 13, 2008 4:27 pm ] |
| Post subject: | Re: moving diff forward |
Go to a metal fab place and get a qoute.. very easy thing to make when you have the right tools.. reckon it would be HEAPS cheaper to go that way! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|