| auszookers.com https://auszookers.com/forum/ |
|
| 98 jimny steering https://auszookers.com/forum/viewtopic.php?f=5&t=35215 |
Page 1 of 1 |
| Author: | ellis [ Fri Aug 24, 2012 12:35 pm ] |
| Post subject: | 98 jimny steering |
hey guys i was out driving today and tryed to climb this big rock with my front right tyre on it had a couple cracks at it bounceing a few times and there was a cruching type noise now it doesnt want to turn very far it seems to turn one way fine sometimes but when u go the other way it will not turn very far could this be a cv or any ideas on what it could be |
|
| Author: | atari4x4 [ Fri Aug 24, 2012 12:46 pm ] |
| Post subject: | Re: 98 jimny steering |
sounds like a shattered CV bell & the bits are jamming up in the swivel hub... don't drive it until you're removed the broken bits, as they could jam up at the wrong time. |
|
| Author: | ellis [ Fri Aug 24, 2012 12:58 pm ] |
| Post subject: | Re: 98 jimny steering |
ok thanks is there a way to tell what side is broken or do i just cheak both |
|
| Author: | atari4x4 [ Fri Aug 24, 2012 1:07 pm ] |
| Post subject: | Re: 98 jimny steering |
i'd be looking at the side that the noise came from first. |
|
| Author: | ellis [ Fri Aug 24, 2012 1:10 pm ] |
| Post subject: | Re: 98 jimny steering |
ok cheers ill go cheak it out |
|
| Author: | ellis [ Fri Aug 24, 2012 2:32 pm ] |
| Post subject: | Re: 98 jimny steering |
cheers it was the cv |
|
| Author: | bigdogdazza [ Fri Aug 24, 2012 5:30 pm ] |
| Post subject: | Re: 98 jimny steering |
Got to try and be smoooooth, no bouncing etc this is definitely a cv killer and transfer case wrecker. I watched my brother destroy a cv and transfer case in his d22 navara by doing exactly the same thing, couldn't climb it on the line he was on so gave it the berries.... When that didn't work the old give it more berries came into play with lots of bouncing/breaking/crunching/chain slipping noises and 1 broken truck. Smooth flowing is the key if you can, if not pick different line or pack the obstacle= no breakages. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|