[_noddy]

Im trying to get my doors off but the bolts are shit i have tryed one of theos bashey things wat eles can i try.

[Mike]

weld a nut onto the screw and use a ratchet/breaker bar

[just_cruizin]

cold chisel

[Mike]

just_cruizin wrote:

cold chisel

just play khe sahn really loud and the doors will fall off

[BlueSuzy]

Now what the?

[hooki]

haha jimmy barnes

[royce]

Blow torch

[Damo]

You can try mechanical methods like the impact driver or a cold chisel. I have used the big screwdriver bit from the impact driver and put it onto my rattle gun which worked a few times but after a while it just shatters the bit like glass!!

If none of that works you need to introduce some heat. Like Royce mentioned a blow torch should do it. An oxy will work too. If you weld a nut onto the head of the bolt the heat from the weld will make it easy to undo, and as a bonus you willnow have a nut to put a spanner on too.

[just_cruizin]

park on a main street and throw the door open when a taxi goes past.

[appsie]

i like some of these methods fellas.I have always done mine with a cold chisel and tapped it loose tho.can be a pain at times but once your running bolts instead of those ridiculous screws its great

[Hybrid]

You could cut the top tube of your hinge off and make the doors removable. Thats what I did so I could swap between full doors and half doors (yet to be cut down). You just open the doors and lift them off.