cheers guys, being made right now
| auszookers.com https://auszookers.com/forum/ |
|
| brake lines length? for lift. https://auszookers.com/forum/viewtopic.php?f=5&t=3528 |
Page 1 of 1 |
| Author: | hooki [ Thu Dec 11, 2008 8:10 am ] |
| Post subject: | brake lines length? for lift. |
hi, i have all the parts to do a ruf front setup using 2inch efs rear springs all round with 2inch shackles. I have put the rear in and all is good. I'm looking at finishing the rest of the setup on friday night for the w/e but was just wondering how much i should extend the front brake lines by and also how much i should extend the rear line that goes to the bracket on the drivers side of the diff? I would have put the suspension in then flexed it up to see how long the brake lines would need to be but i wont have time before late friday and i would like to have everything ready to go for friday night. |
|
| Author: | smileysmoke [ Thu Dec 11, 2008 11:30 pm ] |
| Post subject: | Re: brake lines length? for lift. |
i have ext shackles in mine with 2" springs and i only just put in ext brake lines recently like after 1 yr of having that stuff in.. you should get away with it for a bit.. but yeh flex it up and see how it goes.. 2" over standard length should do the trick.. think swift ones should fit but they are like 4" longer i think.. |
|
| Author: | royce [ Thu Dec 11, 2008 11:46 pm ] |
| Post subject: | Re: brake lines length? for lift. |
yeah swift is a bit too long, just get however much longer your shocks are |
|
| Author: | Brett [ Fri Dec 12, 2008 12:15 am ] |
| Post subject: | Re: brake lines length? for lift. |
go 4" maybe 5" because of the extra ark in your spring. 4"is what i did in the last ruf i did. had a bit left in them. when you put them in turn one end around so it has a little twist in the line. then you dont need to make up a spring to keep the line from catching on any thing or ending up under your bumpstop. |
|
| Author: | hooki [ Fri Dec 12, 2008 9:01 pm ] |
| Post subject: | Re: brake lines length? for lift. |
cheers guys, being made right now
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|