| auszookers.com https://auszookers.com/forum/ |
|
| ARB Bar tube diameter https://auszookers.com/forum/viewtopic.php?f=5&t=35573 |
Page 1 of 1 |
| Author: | Scales [ Sat Sep 08, 2012 3:30 pm ] |
| Post subject: | ARB Bar tube diameter |
Can someone tell me what dia tube is fitted to a Jimny ARB bar? Im not home to measure mine and I need to order some UHF mounts for it. |
|
| Author: | zooky08 [ Sat Sep 08, 2012 3:54 pm ] |
| Post subject: | Re: ARB Bar tube diameter |
Pretty sure its 50mm i can confirm in a hr if some ones doesnt beat me to it. |
|
| Author: | Scales [ Sat Sep 08, 2012 3:59 pm ] |
| Post subject: | Re: ARB Bar tube diameter |
Cheers bro, at work for a few weeks so I can't check myself |
|
| Author: | Scales [ Sat Sep 08, 2012 6:10 pm ] |
| Post subject: | Re: ARB Bar tube diameter |
How did ya go mate? |
|
| Author: | zooky08 [ Sun Sep 09, 2012 11:12 am ] |
| Post subject: | Re: ARB Bar tube diameter |
Sorry had no phone coverage. Roughly 50mm mate. |
|
| Author: | Scales [ Sun Sep 09, 2012 2:42 pm ] |
| Post subject: | Re: ARB Bar tube diameter |
thanks dude, sorry to yarp on, needs to be bang on accurate apparantly. The bloke rekons that a few mm will make it look shit. so roughly 50mm?? or EXACTLY 50mm? |
|
| Author: | tim80z [ Tue Sep 11, 2012 1:38 pm ] |
| Post subject: | Re: ARB Bar tube diameter |
Hey Scales, I just measured mine with a set of digital calipers and got 48mm outside diameter. I doubt that part of the bar has changed between models but for reference my bar is a 3424020 which is the 98-05 winch bar. Seeing as your car is an 03 it will most likely be the same model bar but may be the 3424030 which suits 98-on. - Tim. |
|
| Author: | Scales [ Tue Sep 11, 2012 9:25 pm ] |
| Post subject: | Re: ARB Bar tube diameter |
Cheers heaps Tim, I can order tha bracketry now. Seeya at Fraser! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|