| auszookers.com https://auszookers.com/forum/ |
|
| Would a 2000 Jimny bullbar fit a 98 Jimny https://auszookers.com/forum/viewtopic.php?f=5&t=35615 |
Page 1 of 1 |
| Author: | C.00.K13 [ Mon Sep 10, 2012 7:14 am ] |
| Post subject: | Would a 2000 Jimny bullbar fit a 98 Jimny |
Would a 2000 model Jimny bullbar fit a 98 Jimny? Would I have to change anything |
|
| Author: | squibby [ Mon Sep 10, 2012 9:32 am ] |
| Post subject: | Re: Would a 2000 Jimny bullbar fit a 98 Jimny |
yes I believe so, no probably not. Just have an angle grinder and a bit of paint to hand before you start |
|
| Author: | jimny_timmy [ Mon Sep 10, 2012 9:41 am ] |
| Post subject: | Re: Would a 2000 Jimny bullbar fit a 98 Jimny |
It will fit... 98-2005-6 are all the same... After that are different due to abs etc |
|
| Author: | C.00.K13 [ Mon Sep 10, 2012 11:31 am ] |
| Post subject: | Re: Would a 2000 Jimny bullbar fit a 98 Jimny |
Awsome!!! |
|
| Author: | bigdogdazza [ Mon Sep 10, 2012 6:11 pm ] |
| Post subject: | Re: Would a 2000 Jimny bullbar fit a 98 Jimny |
Is this an Xrox bar by any chance? I looked into this via an eBay seller. I was less than impressed by his response of " if you can weld just cut it up to make it fit" response! I ended up seeing a mate who made a bar AND rock sliders to my design well under the retail of the Xrox! But they do look awesome! |
|
| Author: | C.00.K13 [ Mon Sep 10, 2012 6:18 pm ] |
| Post subject: | Re: Would a 2000 Jimny bullbar fit a 98 Jimny |
Nar a guy is trying to sell me a tjm winch bar to suit s Jimny |
|
| Author: | bigdogdazza [ Mon Sep 10, 2012 6:40 pm ] |
| Post subject: | Re: Would a 2000 Jimny bullbar fit a 98 Jimny |
Ok no probs lol! I just wasn't keen in a dealer selling me a product and telling me to cut it up to fit and void warranty! Seems a little dodgy to me and at $1200+ could be a costly mistake! |
|
| Author: | jimny_timmy [ Mon Sep 10, 2012 7:05 pm ] |
| Post subject: | Re: Would a 2000 Jimny bullbar fit a 98 Jimny |
C.00.K13 wrote: Nar a guy is trying to sell me a tjm winch bar to suit s Jimny I didn't think tjm made a bar to suit jimnys at all??? |
|
| Author: | C.00.K13 [ Mon Sep 10, 2012 7:16 pm ] |
| Post subject: | Re: Would a 2000 Jimny bullbar fit a 98 Jimny |
Idk but a guy said it was a tjm lol?? |
|
| Author: | jimny_timmy [ Mon Sep 10, 2012 7:35 pm ] |
| Post subject: | Re: Would a 2000 Jimny bullbar fit a 98 Jimny |
Pm me the link? |
|
| Author: | C.00.K13 [ Mon Sep 10, 2012 7:57 pm ] |
| Post subject: | Re: Would a 2000 Jimny bullbar fit a 98 Jimny |
I'll send the pic to ya bro |
|
| Author: | atari4x4 [ Mon Sep 10, 2012 8:18 pm ] |
| Post subject: | Re: Would a 2000 Jimny bullbar fit a 98 Jimny |
you mean this one in the ebay thread? tim80z wrote: Cheap Jimny ARB bar although it does have some damage to one side.
http://www.ebay.com.au/itm/300776500743 The seller thinks its a TJM bar because someone put a TJM sticker over the ARB one.  - Tim. |
|
| Author: | C.00.K13 [ Mon Sep 10, 2012 8:32 pm ] |
| Post subject: | Re: Would a 2000 Jimny bullbar fit a 98 Jimny |
Yer lol that's the one |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|