Pull it off, From memory it is a bearing inside that could be bought at a bearing place. Im using one but on a different motor.
How big does the tensioner look? I could be getting mixed up with another baleno one i have
| auszookers.com https://auszookers.com/forum/ |
|
| 04 Jimny Idler Tensioner (A/C P/S) Quiz https://auszookers.com/forum/viewtopic.php?f=5&t=35745 |
Page 1 of 1 |
| Author: | Glanza777 [ Sat Sep 15, 2012 7:43 pm ] |
| Post subject: | 04 Jimny Idler Tensioner (A/C P/S) Quiz |
Hey guys, Having the issue with sourcing a idler tensioner pulley for the M13A Only one i have been able to source is http://www.suzistore.com.au/shopexd.asp?id=1897 For $250 thats crazy!!! Autobarn, Repco, Supercheap etc... have no idea what i am on about either :S Reason for trying to find one is, it is destroying the P/S A/C belt and has visible signs of due replacement. Has anyone attempted to even replace *just* the bearing? On i think http://www.suzuki-forums.com , a few people spoke about doing this same replacement on there late model GV's? pictures looked as though it was the exact setup as our M13A's??? :S ANY info is highly appreciated! |
|
| Author: | BlueSuzy [ Sat Sep 15, 2012 9:28 pm ] |
| Post subject: | Re: 04 Jimny Idler Tensioner (A/C P/S) Quiz |
Pull it off, From memory it is a bearing inside that could be bought at a bearing place. Im using one but on a different motor. How big does the tensioner look? I could be getting mixed up with another baleno one i have
|
|
| Author: | Scales [ Sun Sep 16, 2012 8:07 am ] |
| Post subject: | Re: 04 Jimny Idler Tensioner (A/C P/S) Quiz |
isnt it similar to a Barina one or some hatchback like that? vaugely remember this coming up before.... |
|
| Author: | Blakey [ Sun Sep 16, 2012 9:31 am ] |
| Post subject: | Re: 04 Jimny Idler Tensioner (A/C P/S) Quiz |
BlueSuzy wrote: Pull it off, From memory it is a bearing inside that could be bought at a bearing place. Im using one but on a different motor. How big does the tensioner look? I could be getting mixed up with another baleno one i have I agree pull it off. and take it to a bearing place will save you heaps pretty sure its only 2 bolts that hold it on. |
|
| Author: | Glanza777 [ Sun Sep 16, 2012 10:35 am ] |
| Post subject: | Re: 04 Jimny Idler Tensioner (A/C P/S) Quiz |
BlueSuzy wrote: Pull it off, From memory it is a bearing inside that could be bought at a bearing place. Im using one but on a different motor. How big does the tensioner look? I could be getting mixed up with another baleno one i have |
|
| Author: | BlueSuzy [ Sun Sep 16, 2012 10:38 am ] |
| Post subject: | Re: 04 Jimny Idler Tensioner (A/C P/S) Quiz |
oh yeah im mixed up. I have a good one here i think, if you want. will just try it now |
|
| Author: | Glanza777 [ Sun Sep 16, 2012 10:39 am ] |
| Post subject: | Re: 04 Jimny Idler Tensioner (A/C P/S) Quiz |
Scales wrote: isnt it similar to a Barina one or some hatchback like that? vaugely remember this coming up before.... It should be the exact same as your - M13A - Liana, Jimny, Ignis... M15A - Ignis, Swift, SX4, Cruze... M16A - SX4, Liana, Swift Sport, GV's... M18A - Liana... |
|
| Author: | Glanza777 [ Sun Sep 16, 2012 10:41 am ] |
| Post subject: | Re: 04 Jimny Idler Tensioner (A/C P/S) Quiz |
BlueSuzy wrote: oh yeah im mixed up. I have a good one here i think, if you want. will just try it now Oh, Cheers! Thankyou! Even if it is a bad one, ill take it to get a new bearing installed 
|
|
| Author: | Scales [ Sun Sep 16, 2012 11:50 am ] |
| Post subject: | Re: 04 Jimny Idler Tensioner (A/C P/S) Quiz |
Glanza777 wrote: Scales wrote: isnt it similar to a Barina one or some hatchback like that? vaugely remember this coming up before.... It should be the exact same as your - M13A - Liana, Jimny, Ignis... M15A - Ignis, Swift, SX4, Cruze... M16A - SX4, Liana, Swift Sport, GV's... M18A - Liana... Oh, yeah of course those too.. but i specifically remember someone mentioning a NON-suzuki part (Read: Not $$$$). Ah well bugger it... itll come to me eventually. But yeah, as the boys have said. just press out the bearing and get a replacement... piss. |
|
| Author: | BlueSuzy [ Sun Sep 16, 2012 4:20 pm ] |
| Post subject: | Re: 04 Jimny Idler Tensioner (A/C P/S) Quiz |
Ok the one i have here is the same. 88mm diameter. Bearing runs smooth but the surface where the belt was running, there is a groove, the width of the belt, like the rubber belt has worn in It is all pressed together. 1 piece. You could maybe try and pry one of the sides off, but could be risky. |
|
| Author: | Glanza777 [ Sun Sep 16, 2012 6:28 pm ] |
| Post subject: | Re: 04 Jimny Idler Tensioner (A/C P/S) Quiz |
BlueSuzy wrote: Ok the one i have here is the same. 88mm diameter. Bearing runs smooth but the surface where the belt was running, there is a groove, the width of the belt, like the rubber belt has worn in It is all pressed together. 1 piece. You could maybe try and pry one of the sides off, but could be risky. My work has a press so, i may be able to press the old, press the new bearing on? Now, down to business, How much 
|
|
| Author: | BlueSuzy [ Sun Sep 16, 2012 7:05 pm ] |
| Post subject: | Re: 04 Jimny Idler Tensioner (A/C P/S) Quiz |
Yeah maybe, It really doesnt look like it would like to come apart. Looks like a unique component, thats why they can charge so much. pm'd. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|