Is that not what you are supposed to be doing?
| auszookers.com https://auszookers.com/forum/ |
|
| sierra venturi fix https://auszookers.com/forum/viewtopic.php?f=5&t=35826 |
Page 1 of 1 |
| Author: | rob45x [ Tue Sep 18, 2012 10:55 pm ] |
| Post subject: | sierra venturi fix |
where is the cheapest place i can get one of these carb venturi fix kits? low range off road has them but will cost me $60 with shipping. anywhere in aus???? |
|
| Author: | Reubs [ Tue Sep 18, 2012 11:05 pm ] |
| Post subject: | Re: sierra venturi fix |
Talking about these: http://www.lowrangeoffroad.com/index.php/suzuki/samurai/engine-upgrade/venturi-tube.html The US Samurai uses a Hitachi carb. Australian Sierra has an Aisan carb. These are designed for the Hitachi carb. I have 2 of these I bought as genuine parts. They don't fit on an Aisan carb! They can't be shoved in either - the hitachi carb has a squared off hole in the casting and the Aisan carb has a brass pipe cut on an angle which is a different size. This mod could probably be done DIY if you can find the right size tubing to do the job. P.S. they cost me $25 ea. in Suzuki genuine packets. I've gotta remember to return them for credit sometime at a certain suzuki shop! Here is the thread on NBS... http://nbs4x4club.com/forum/index.php?topic=13969.0 |
|
| Author: | rob45x [ Wed Sep 19, 2012 6:16 am ] |
| Post subject: | Re: sierra venturi fix |
Damn ! Weird how both carbs do the same annoying thing lol |
|
| Author: | SierraDan [ Wed Sep 19, 2012 6:46 am ] |
| Post subject: | Re: sierra venturi fix |
Unless you're trying to drag commodores all the time, it doesn't really matter. |
|
| Author: | Jackson [ Wed Sep 19, 2012 9:17 am ] |
| Post subject: | Re: sierra venturi fix |
Is that not what you are supposed to be doing?
|
|
| Author: | rob45x [ Wed Sep 19, 2012 10:05 am ] |
| Post subject: | Re: sierra venturi fix |
It's just annoying to drive. Very minor but I wanna try fix it |
|
| Author: | JrZook [ Wed Sep 19, 2012 11:16 am ] |
| Post subject: | Re: sierra venturi fix |
When was the last time the carb was cleaned out and a kit put through it? |
|
| Author: | rob45x [ Wed Sep 19, 2012 11:39 am ] |
| Post subject: | Re: sierra venturi fix |
Not sure. Only been owned by me for a week. Drives great. Just the slight hesitation |
|
| Author: | 303zuke [ Wed Sep 19, 2012 12:33 pm ] |
| Post subject: | Re: sierra venturi fix |
rob45x wrote: Damn ! Weird how both carbs do the same annoying thing lol The issue is not just isolated to these two carbs, it occurs with every and any type of carb. Holley have brought out a kit to modify their carbs for steep angle work, and it is also factory fitted to their range of Truck Avenger carbs. By far, the vast majority of carburettors are designed for applications where the engines generally operate at inclinations of up to 5 degrees. Even on normal cars, you can get flooding/starvation issues when climbing or descending long hills. Some carbs eliminate the issue by design, such as SU carbs, or even the types fitted to Tractors and Aero engines. It's just one of the quirks you get used to with a carb engine. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|