auszookers.com
https://auszookers.com/forum/

GV King springs upfront?
https://auszookers.com/forum/viewtopic.php?f=5&t=35841		 Page 1 of 1
Author:  Chop [ Wed Sep 19, 2012 4:57 pm ]
Post subject:  GV King springs upfront?
Who is running them and how are they holding up? And what sizes are they?
Some literature says 40mm and some people say 50mm but in the front of the book at my local parts store it says "Raised springs are a lift of 20-30mm"

My dobinsons won't like the extra weight of the JML bar, winch and battery. I want it to be reasonably level with the weight fitted
Author:  Bruce [ Wed Sep 19, 2012 5:20 pm ]
Post subject:  Re: GV King springs upfront?
Fit some spacers :-)
Author:  Chop [ Wed Sep 19, 2012 5:24 pm ]
Post subject:  Re: GV King springs upfront?
I already have some of that Bruce blokes spacers fitted :wink:
Author:  Built4thrashing [ Wed Sep 19, 2012 5:25 pm ]
Post subject:  Re: GV King springs upfront?
Im using King springs in the front. They handle the weight of my alloy bar, winch and dual battery setup with little issue.

gave me 50mm lift when first fitted but that was before the mods started

Has Sagged about 10mm since fitted.
Author:  Bruce [ Wed Sep 19, 2012 5:32 pm ]
Post subject:  Re: GV King springs upfront?
Chop wrote:
I already have some of that Bruce blokes spacers fitted :wink:


:wink: Go bigger :thefinger:
Author:  gregdixon [ Wed Sep 19, 2012 5:46 pm ]
Post subject:  Re: GV King springs upfront?
the king springs i fitted to the blue GV gave 30mm of lift. Didn't get any extra lift over advertised.
Author:  atari4x4 [ Wed Sep 19, 2012 5:49 pm ]
Post subject:  Re: GV King springs upfront?
you're going to need macdaddy spec toughdogg 6" front springs
Author:  MacDaddy [ Wed Sep 19, 2012 9:08 pm ]
Post subject:  Re: GV King springs upfront?
atari4x4 wrote:
you're going to need macdaddy spec toughdogg 6" front springs


:lol:
They are only 40mm tough dogs, but because they are load rated to 300kgs, they really keep the front end up high, which imo, is good if you want to put extra weight on the front... :D
Author:  DarkHorse [ Wed Sep 19, 2012 9:56 pm ]
Post subject:  Re: GV King springs upfront?
Just make sure you put em in right way up... :thefinger:
Author:  MacDaddy [ Thu Sep 20, 2012 5:27 am ]
Post subject:  Re: GV King springs upfront?
DarkHorse wrote:
Just make sure you put em in right way up... :thefinger:

:rofl: :rofl: :rofl:
Pay that one... :lol:
Author:  shabz [ Thu Sep 20, 2012 7:11 pm ]
Post subject:  Re: GV King springs upfront?
Another option is the dobinsons XL7 lifted springs. I've got them in mine without spacers and handle the weight of bar, winch and batteries pretty well.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/