auszookers.com
https://auszookers.com/forum/

Triple carbs
https://auszookers.com/forum/viewtopic.php?f=5&t=35940		 Page 1 of 1
Author:  LJ50 turbo [ Mon Sep 24, 2012 6:58 pm ]
Post subject:  Triple carbs
I am planning on making some tripple carb kits, anyone interested?
Author:  shep [ Mon Sep 24, 2012 7:03 pm ]
Post subject:  Re: Tripple carbs
What to fit? Not much point bolting 3 carbs to a g13
Author:  zukmeista [ Tue Sep 25, 2012 4:59 am ]
Post subject:  Re: Tripple carbs
shep wrote:
What to fit? Not much point bolting 3 carbs to a g13

:roll: Take one look at his username. What do you think :thefinger:
Author:  tanshi [ Tue Sep 25, 2012 9:10 am ]
Post subject:  Re: Triple carbs
Yep interested!
Author:  LJ50 turbo [ Tue Sep 25, 2012 3:22 pm ]
Post subject:  Re: Tripple carbs
i have a few sets of the factory tripples of the fronte LC10W but i plan to make new maniflds with larger carbys

Attachment:
tripples2.jpg


Attachment:
tripple01.jpg
Author:  TZAR [ Tue Sep 25, 2012 3:26 pm ]
Post subject:  Re: Tripple carbs
Do you have any duals????
Author:  tanshi [ Tue Sep 25, 2012 3:30 pm ]
Post subject:  Re: Tripple carbs
IM assuming they will be setup to work the oil pump as the standard one is?
Author:  JrZook [ Tue Sep 25, 2012 10:35 pm ]
Post subject:  Re: Triple carbs
Triple injected throttle bodies!! :D
Author:  303zuke [ Tue Sep 25, 2012 11:13 pm ]
Post subject:  Re: Tripple carbs
LJ50 turbo wrote:
i have a few sets of the factory tripples of the fronte LC10W but i plan to make new maniflds with larger carbys

Attachment:
tripples2.jpg


Attachment:
tripple01.jpg

I'll take an old Manifold if you're not going to use it, and interested in a factory Manifold + 3 Carb set up if you have one spare.
Author:  tanshi [ Wed Sep 26, 2012 8:22 am ]
Post subject:  Re: Triple carbs
i would be interested in a set of standard too honestly.
Author:  303zuke [ Wed Sep 26, 2012 4:13 pm ]
Post subject:  Re: Triple carbs
A Mate of mine used to have a SC100 in the 80's. It was the F10A version of the rear-engined Fronte, and I was lucky enough to get the Service Manual and Parts Manual off him when he wrote it off. He also had a Parts Manual for the LC20. The LC20 was also a rear-engined 3 cyl 2 stroke, but it didn't have triple carbs, it had one big downdraught like the LJ50.

Can you show us some pics of your LC10W's engine? It's basically an LJ50 3 cyl, but with an odd sandwich head and mounted transversly at the rear.
Author:  LJ50 turbo [ Wed Sep 26, 2012 4:24 pm ]
Post subject:  Re: Triple carbs
i've got tripple throttle body of a triumph, i am going to use a daihatsu ecu (got stacks of em) which requires a electronic dizzy to trigger it.
Author:  tanshi [ Wed Sep 26, 2012 4:28 pm ]
Post subject:  Re: Triple carbs
interested. I also have a triumph triple 900 throttle body, was looking at mega squirting it. but looking forward to hearing more about your setup
Author:  LJ50 turbo [ Wed Sep 26, 2012 7:26 pm ]
Post subject:  Re: Triple carbs
triumph throttle body a little wide for lj50, i am making a cad drawing of a more suitable throttle body. probably 38mm butterfly

Attachment:
lj50tripple2.jpg
Author:  want33s [ Wed Sep 26, 2012 7:35 pm ]
Post subject:  Re: Triple carbs
Thread title edited for correct spelling so it can be found in a search.
Author:  JrZook [ Wed Sep 26, 2012 7:46 pm ]
Post subject:  Re: Triple carbs
LJ50 turbo wrote:
i've got tripple throttle body of a triumph, i am going to use a daihatsu ecu (got stacks of em) which requires a electronic dizzy to trigger it.


Sounds quite interesting :wink: . Wonder how far the fuelling and timing will be off. Which Daihatsu ECUs you thinking of using?
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/