auszookers.com
https://auszookers.com/forum/

MIC offroad contact details?
https://auszookers.com/forum/viewtopic.php?f=5&t=36153		 Page 1 of 1
Author:  SkIpAi [ Fri Oct 05, 2012 12:26 pm ]
Post subject:  MIC offroad contact details?
Anyone have a phone number or something for MIC offroad?

Cheers
Author:  stockman [ Fri Oct 05, 2012 12:44 pm ]
Post subject:  Re: MIC offroad contact details?
I see they closed there ebay store.
http://cgi6.ebay.com.au/ws/eBayISAPI.dl ... oad&_rdc=1
Author:  SkIpAi [ Fri Oct 05, 2012 12:55 pm ]
Post subject:  Re: MIC offroad contact details?
Yeah I noticed that. Not replying to emails via there home page either...
Author:  Chop [ Fri Oct 05, 2012 2:46 pm ]
Post subject:  Re: MIC offroad contact details?
You guys must look in the wrong places, i knew i seen it the other day still up.

http://www.ebay.com.au/itm/Suzuki-Jimny ... 3a7a41a645
Author:  jake84 [ Mon Oct 28, 2013 2:39 pm ]
Post subject:  Re: MIC offroad contact details?
Hi guys I need his number as I need to know if I can actually use the rear bar when towing I brought a jimny with his wing arm bar and it has a place for the tong but I want to know if I can actually use it first and whats it rated to he will not answer my emails grr
Author:  christover1 [ Mon Oct 28, 2013 6:56 pm ]
Post subject:  Re: MIC offroad contact details?
If you are worried, take it to a tow bar or trailer shop to check if it is safe.
I'm fairly sure the place no longer exists.
Author:  Mike57 [ Mon Oct 28, 2013 7:14 pm ]
Post subject:  Re: MIC offroad contact details?
Even if you can find them they would not be able to give you an answer. They are made in China and don't necessarily comply with any Australian standards. Having said that though I have their standard tow bar and all the welds look good. I have used it for recovery only (no towing) and it seems quite solid. My only issue was that both the tongue and tow ball supplied were imperial and useless in Australia. I also threw away the horribly undersized bolts they supplied and got a larger size grade 10.9 bolts all round.

As Chris says get it checked out by an engineer or a tow bar place. If properly attached the chassis my bet is that it will be OK. You probably also have a 50mm x 50mm hitch receiver on it which is the main reason I got it. You can buy a standard Aussie hitch to fit it.
Author:  -QIK- [ Wed Oct 30, 2013 7:47 pm ]
Post subject:  Re: MIC offroad contact details?
Marricville, Sydney is were the workshop is.

Have a look around the forum. A number of people have spent some coin buying parts off them. They should have contact details. I think someone N.T. way with a jimny spent alot of money from here.

Cheers,

Rob.
Author:  Jezza86 [ Fri Nov 01, 2013 2:30 pm ]
Post subject:  Re: MIC offroad contact details?
-QIK- wrote:
Marricville, Sydney is were the workshop is.

Have a look around the forum. A number of people have spent some coin buying parts off them. They should have contact details. I think someone N.T. way with a jimny spent alot of money from here.

Cheers,

Rob.

i only have their rear bar.
Author:  atari4x4 [ Fri Nov 01, 2013 3:02 pm ]
Post subject:  Re: MIC offroad contact details?
pretty sure he's thinking of squibby in NSW with the M18 jimny with all the MIC fruit + engineers cert. :wink:
Author:  jake84 [ Mon Nov 04, 2013 1:25 pm ]
Post subject:  Re: MIC offroad contact details?
thanks guys ill take the road runner to a toe bar place and see what they say cheers
Author:  Jezza86 [ Fri Nov 22, 2013 8:59 pm ]
Post subject:  Re: MIC offroad contact details?
all the MIC Offroad products for the jimny...http://www.aliexpress.com/store/group/J ... 06957.html
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/