| Author |
Message |
DAZOOK_96
Joined: Sun Jun 26, 2011 1:09 am Posts: 79 Location: Wyee, Nsw
|
 Posted: Sat Oct 13, 2012 6:42 pm |
|
|
Hi guys, Today I installed a saffari snorkel on my coily, I plumbed it straight into the air box replacing all the stock piping. But now my car is idling really rough if at all. Would this have something to do with that valve on the original piping? This is my first thought, but for the day I drove around with no piping at all due to lack of pipe it ran fine, any help is appreciated.
|
|
|
|
 |
zukmeista
Joined: Sun Mar 22, 2009 10:30 pm Posts: 1273 Location: Whangarei,N.Z.
|
 Posted: Sat Oct 13, 2012 6:45 pm |
|
|
Replace your fuel filter and clean the carby, can pretty much gaurantee it's a blocked idle jet.
|
|
|
|
 |
jdk81
Joined: Sat Jul 18, 2009 11:30 pm Posts: 2372 Location: Ballarat, VIC
|
 Posted: Sat Oct 13, 2012 7:17 pm |
|
|
In regards to the valve on the original piping, did you block the vacuum hose off? If not, that could be your problem.
On a further note Without the original thermal intake system, you may have carby icing issues in cold moist conditions (which is what we have experienced in nsw, vic and sa over the last few days). You will notice a gradual drop in power, usually at highway speeds, eventually you will lose enough power you will conk out. Wait 30 secs or so and itll run fine for a while.
Also, for to avoid issues in the future, buy a $2-4 motorbike fuel filter and install between fuel pump and carby.
|
|
|
|
 |
runtbase
Joined: Wed Nov 04, 2009 10:30 pm Posts: 223 Location: Bundaberg
Vehicle: Serria
|
 Posted: Sat Oct 13, 2012 8:28 pm |
|
|
The extra length the air needs to travel to get to the carby is greater now That you have added a snorkel you just need to turn the idle up a bit.
Last edited by runtbase on Sun Oct 14, 2012 1:18 pm, edited 2 times in total.
|
|
|
|
 |
TZAR

az supporter
Joined: Tue Aug 01, 2006 11:30 pm Posts: 3461 Location: licking some windows
Vehicle: LJ20 LJ50
|
 Posted: Sun Oct 14, 2012 7:32 am |
|
|
did you reconnect all the vacuum hoses???
_________________ Camels have nice toes
|
|
|
|
 |
Scrawny

I live here!
Joined: Tue Jan 29, 2008 10:30 pm Posts: 10528 Location: Brissie
Vehicle: Popemobile
|
 Posted: Sun Oct 14, 2012 10:00 am |
|
runtbase wrote: The extra length the air needs to travel to get to the carby is greater now That you have added a snorkel you just need to turn the idle up a bit. WTF???!!!!
|
|
|
|
 |
fully sick coily
Joined: Tue Feb 14, 2012 7:47 pm Posts: 474 Location: brisbane
Vehicle: chick magnet coily
|
 Posted: Sun Oct 14, 2012 10:34 am |
|
Scrawn wrote: runtbase wrote: The extra length the air needs to travel to get to the carby is greater now That you have added a snorkel you just need to turn the idle up a bit. WTF???!!!! WTF X2
|
|
|
|
 |
Mattmorgo

az supporter
Joined: Fri May 15, 2009 11:30 pm Posts: 464 Location: Southside Brisbane- the best side of the river
Vehicle: Shitbox
|
 Posted: Sun Oct 14, 2012 10:46 am |
|
Scrawn wrote: runtbase wrote: The extra length the air needs to travel to get to the carby is greater now That you have added a snorkel you just need to turn the idle up a bit. WTF???!!!! Haha I love this place more and more every day. Do as tzar said make sure all your vaccum hoses are back on in te right place. Let me know if you need pictures.
_________________ Scrawn wrote: Signatures are shit anyway
|
|
|
|
 |
DAZOOK_96
Joined: Sun Jun 26, 2011 1:09 am Posts: 79 Location: Wyee, Nsw
|
 Posted: Sun Oct 14, 2012 12:24 pm |
|
|
All good guys chucked some carbie cleaner in and all is good, but of dirt or something might have fallen in, thank you for all your feed back. And yes all vacuum hoses are sealed or on.
|
|
|
|
 |
|