| auszookers.com https://auszookers.com/forum/ |
|
| 1.3l transfer case oil? https://auszookers.com/forum/viewtopic.php?f=5&t=36338 |
Page 1 of 1 |
| Author: | haurp00ned [ Sat Oct 13, 2012 5:13 pm ] |
| Post subject: | 1.3l transfer case oil? |
hey guys i was just wondering how do you drop out and change the oil in the transfer case? i cant seem to locate the buds? cheers. |
|
| Author: | zukmeista [ Sat Oct 13, 2012 5:39 pm ] |
| Post subject: | Re: 1.3l transfer case oil? |
Drain plug is at the bottom, filler bung is on the left side about halfway up. The bungs are designed for a 10mm square drive, but you may get away with a 3/8 ratchet. |
|
| Author: | haurp00ned [ Sat Oct 13, 2012 5:47 pm ] |
| Post subject: | Re: 1.3l transfer case oil? |
yeah i did think that was them cheers, and also how much oil does it take? and what do use recommend cheers. |
|
| Author: | zukmeista [ Sat Oct 13, 2012 6:00 pm ] |
| Post subject: | Re: 1.3l transfer case oil? |
Just under a litre. I use Castrol EPX 80/90. |
|
| Author: | want33s [ Sat Oct 13, 2012 7:05 pm ] |
| Post subject: | Re: 1.3l transfer case oil? |
zukmeista wrote: Just under a litre. I use Castrol EPX 80/90. EPX 80W90 contains Sulphur and Phosphorus which can attack bronze components. Definitely not the recommended oil for Sierra transfer case. Use VMX-M 75W-85.... http://www.datateck.com.au/lube/castr_au/default.asp |
|
| Author: | Joshyboy26 [ Sat Oct 13, 2012 7:09 pm ] |
| Post subject: | Re: 1.3l transfer case oil? |
what is bronxe in a tc? just for anyone looking at this thread haha |
|
| Author: | want33s [ Sat Oct 13, 2012 7:15 pm ] |
| Post subject: | Re: 1.3l transfer case oil? |
Joshyboy26 wrote: what is bronxe in a tc? just for anyone looking at this thread haha The counter shaft washers. |
|
| Author: | Joshyboy26 [ Sat Oct 13, 2012 7:19 pm ] |
| Post subject: | Re: 1.3l transfer case oil? |
ah yes |
|
| Author: | kristov [ Sun Oct 14, 2012 10:17 am ] |
| Post subject: | Re: 1.3l transfer case oil? |
would EPX80-90 be alright to run in my jim transfer case? |
|
| Author: | atari4x4 [ Sun Oct 14, 2012 10:20 am ] |
| Post subject: | Re: 1.3l transfer case oil? |
kristov wrote: would EPX80-90 be alright to run in my jim transfer case? i use this as a guide http://www.datateck.com.au/lube/castr_au/ |
|
| Author: | want33s [ Sun Oct 14, 2012 10:21 am ] |
| Post subject: | Re: 1.3l transfer case oil? |
kristov wrote: would EPX80-90 be alright to run in my jim transfer case? I wouldn't... Castrol ONLY recommend VMX-M for Suzuki transfers.... If EPX was OK I'm sure they'd list it too. |
|
| Author: | kristov [ Sun Oct 14, 2012 10:27 am ] |
| Post subject: | Re: 1.3l transfer case oil? |
atari4x4 wrote: kristov wrote: would EPX80-90 be alright to run in my jim transfer case? i use this as a guide http://www.datateck.com.au/lube/castr_au/ thanks atari  i think ill get a big bottle and change my gearbox to VMX looks like a more quality oil
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|