| auszookers.com https://auszookers.com/forum/ |
|
| Help please! https://auszookers.com/forum/viewtopic.php?f=5&t=36364 |
Page 1 of 1 |
| Author: | ZookiBoi [ Sun Oct 14, 2012 2:06 pm ] |
| Post subject: | Help please! |
I just replaced the distributor o ring and the rocker cover gasket on my 91 sierra and now the car barely starts and can't go above 1500 revs. I haven't touched anything else what could be wrong? |
|
| Author: | Sookie [ Sun Oct 14, 2012 2:08 pm ] |
| Post subject: | Re: Help please! |
Is timing ok? |
|
| Author: | Gwagensteve [ Sun Oct 14, 2012 2:08 pm ] |
| Post subject: | Re: Help please! |
Sookie wrote: Is timing ok? No |
|
| Author: | ZookiBoi [ Sun Oct 14, 2012 2:10 pm ] |
| Post subject: | Re: Help please! |
well it was running perfectly before and I haven't moved anything |
|
| Author: | Chop [ Sun Oct 14, 2012 2:26 pm ] |
| Post subject: | Re: Help please! |
Did you mark everything for the same position when reinstalling the distributor? your probably a tooth out on the dizzy gear. |
|
| Author: | ZookiBoi [ Sun Oct 14, 2012 2:29 pm ] |
| Post subject: | Re: Help please! |
Yes thats what I didn't do now I get to try hand fix the timing. Thanks guys |
|
| Author: | zooky08 [ Sun Oct 14, 2012 2:44 pm ] |
| Post subject: | Re: Help please! |
Try turning dizzy 180 degrees |
|
| Author: | Gwagensteve [ Sun Oct 14, 2012 2:45 pm ] |
| Post subject: | Re: Help please! |
ZookiBoi wrote: well it was running perfectly before and I haven't moved anything yes you have, you're a tooth on the dizzy out. It will be mostly trial and error now to get it right. Steve. |
|
| Author: | ZookiBoi [ Sun Oct 14, 2012 4:29 pm ] |
| Post subject: | Re: Help please! |
Fixed it thanks guys:) |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|