| auszookers.com https://auszookers.com/forum/ |
|
| building rock sliders? https://auszookers.com/forum/viewtopic.php?f=5&t=36411 |
Page 1 of 1 |
| Author: | rob45x [ Mon Oct 15, 2012 9:23 pm ] |
| Post subject: | building rock sliders? |
Hey guys. i wanted to build some rock sliders for my sierra. Just wondering if i wanted to use round tube, what size O.D. tube would i have to buy and what wall thickness will it have to be? Also for the plates that mount to the chassis, what thickness should they be? cheers guys n gals! |
|
| Author: | Trypt [ Mon Oct 15, 2012 9:28 pm ] |
| Post subject: | Re: building rock sliders? |
Why do you want to weld them? U clamp style works fine and is legal. Better yet tsor sliders. |
|
| Author: | DarkHorse [ Mon Oct 15, 2012 10:50 pm ] |
| Post subject: | Re: building rock sliders? |
Where did he say he wants to weld them? There's a thread about this that went a bit nuts recently... viewtopic.php?f=14&t=36121 Short answer is 32NB and U-mounts with the bolts passing over the chassis rails (unless you want to get carried away and make some overly pretty ones like Pete always does  )
|
|
| Author: | atari4x4 [ Mon Oct 15, 2012 10:53 pm ] |
| Post subject: | Re: building rock sliders? |
PM Fatzook... |
|
| Author: | Trypt [ Tue Oct 16, 2012 6:51 am ] |
| Post subject: | Re: building rock sliders? |
Sorry misunderstanding, thought you meant reinforcing plates to weld to chassis |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|