Putting a 1.0L transfer in my zook, but it has the remainder of the old speedo drive stuck in it with nothing to grab onto. Is there any way of getting it out that doesn't involve removing the tcase from the car again?
| auszookers.com https://auszookers.com/forum/ |
|
| Sierra Speedo Drive https://auszookers.com/forum/viewtopic.php?f=5&t=36500 |
Page 1 of 1 |
| Author: | zukmeista [ Sat Oct 20, 2012 1:24 pm ] |
| Post subject: | Sierra Speedo Drive |
Putting a 1.0L transfer in my zook, but it has the remainder of the old speedo drive stuck in it with nothing to grab onto. Is there any way of getting it out that doesn't involve removing the tcase from the car again?
|
|
| Author: | Joshyboy26 [ Sat Oct 20, 2012 1:38 pm ] |
| Post subject: | Re: Sierra Speedo Drive |
something like an easyout? maybe |
|
| Author: | zukmeista [ Sat Oct 20, 2012 1:47 pm ] |
| Post subject: | Re: Sierra Speedo Drive |
They are just a push in fit with a locking bolt to hold it, I can turn it but it doesn't want to come out. |
|
| Author: | Joshyboy26 [ Sat Oct 20, 2012 1:54 pm ] |
| Post subject: | Re: Sierra Speedo Drive |
what about a bolt or something that you can force or screw into it that will lock up perhaps a drill bit then you can get a pair of vicegrips and reef on it to pull it out |
|
| Author: | shep [ Sat Oct 20, 2012 3:25 pm ] |
| Post subject: | Re: Sierra Speedo Drive |
Fuck I am enjoying withholding the info on how to get it out  
|
|
| Author: | BlueSuzy [ Sat Oct 20, 2012 3:28 pm ] |
| Post subject: | Re: Sierra Speedo Drive |
shep wrote: Fuck I am enjoying withholding the info on how to get it out BanSheP'n'DaN ! |
|
| Author: | atari4x4 [ Sat Oct 20, 2012 3:38 pm ] |
| Post subject: | Re: Sierra Speedo Drive |
Joshyboy26 wrote: what about a bolt or something that you can force or screw into it that will lock up perhaps a drill bit then you can get a pair of vicegrips and reef on it to pull it out he wouldn't have drill bit's cause he doesn't own a drill |
|
| Author: | zukmeista [ Sat Oct 20, 2012 3:47 pm ] |
| Post subject: | Re: Sierra Speedo Drive |
I do now 
|
|
| Author: | zukmeista [ Sat Oct 20, 2012 3:48 pm ] |
| Post subject: | Re: Sierra Speedo Drive |
shep wrote: Fuck I am enjoying withholding the info on how to get it out Oh noez shep you are making me so sad because I need your help so very much 
|
|
| Author: | Jackson [ Sat Oct 20, 2012 3:56 pm ] |
| Post subject: | Re: Sierra Speedo Drive |
lik dis but wif moar sheepz 
|
|
| Author: | zukmeista [ Sat Oct 20, 2012 4:00 pm ] |
| Post subject: | Re: Sierra Speedo Drive |
Hmm will have another look tomorrow, but I'm pretty sure the hole in the middle is filled by whats left of the cable, may be able to drill it and do that though? |
|
| Author: | hooki [ Sun Oct 21, 2012 2:11 am ] |
| Post subject: | Re: Sierra Speedo Drive |
remove 10mm bolt and use pliers as shown above. You may have to twist the speedo drive to get it to come out. Also try rotating the input shaft whilst pulling on the speedo drive. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|