[zukmeista]

Putting a 1.0L transfer in my zook, but it has the remainder of the old speedo drive stuck in it with nothing to grab onto. Is there any way of getting it out that doesn't involve removing the tcase from the car again?

[Joshyboy26]

something like an easyout? maybe

[zukmeista]

They are just a push in fit with a locking bolt to hold it, I can turn it but it doesn't want to come out.

[Joshyboy26]

what about a bolt or something that you can force or screw into it that will lock up perhaps a drill bit then you can get a pair of vicegrips and reef on it to pull it out

[shep]

Fuck I am enjoying withholding the info on how to get it out

[BlueSuzy]

shep wrote:

Fuck I am enjoying withholding the info on how to get it out

BanSheP'n'DaN !

[atari4x4]

Joshyboy26 wrote:

what about a bolt or something that you can force or screw into it that will lock up perhaps a drill bit then you can get a pair of vicegrips and reef on it to pull it out

he wouldn't have drill bit's cause he doesn't own a drill

[zukmeista]

I do now

[zukmeista]

shep wrote:

Fuck I am enjoying withholding the info on how to get it out

Oh noez shep you are making me so sad because I need your help so very much

[Jackson]

lik dis but wif moar sheepz

[zukmeista]

Hmm will have another look tomorrow, but I'm pretty sure the hole in the middle is filled by whats left of the cable, may be able to drill it and do that though?

[hooki]

remove 10mm bolt and use pliers as shown above. You may have to twist the speedo drive to get it to come out. Also try rotating the input shaft whilst pulling on the speedo drive.