| auszookers.com https://auszookers.com/forum/ |
|
| G13BA block (barina) to G13B DOHC Head compatibility https://auszookers.com/forum/viewtopic.php?f=5&t=36539 |
Page 1 of 1 |
| Author: | Darren W [ Sun Oct 21, 2012 8:05 pm ] |
| Post subject: | G13BA block (barina) to G13B DOHC Head compatibility |
just a quick question I have G13BA single cam Engine from from a barina and was wanting to know if the G13B DHOC head will fit, and what issues if any with O2 and knock sensors etc. have just joined up, great site, any one from central west NSW, around Dubbo Darren w |
|
| Author: | BlueSuzy [ Sun Oct 21, 2012 8:44 pm ] |
| Post subject: | Re: G13BA block (barina) to G13B DOHC Head compatibility |
YEs it will fit but the pistons will have to be changed to suit the valves. Not sure what else. jimbo jones has done this. A simpler swap would be to swap the whole block. It will all bolt up but will need normal conversion things like water outlets and dizzy mod for nrth south motor, new unique extractors etc etc |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|