[jim_dover]

I picked up a g16b out of a vitara and have started stripping the loom down and ran into a slight problem. The motor has a built in coil. That is the dizzy and coil are built together. And so the wiring diagrams i have found don't match.

I thought maybe it was a simple case that the wires would be the same and just all run to the dizzy. But sadly it is not the case. The only thing i can think of is hook all the loom up and strip it down only leaving me with the motor bits. Just didn't want to do this if i can find a diagram.

Any help/advice would be appreciated.

Cheers

[christover1]

http://www.suzukiinfo.com/

worth a try on there

[Mickc]

Link to Tech Article by Damo, "Late model g16 dizzy with integrated coil"

viewtopic.php?f=17&t=23577&hilit=%2Ag16+coil+wiring%2A

[jim_dover]

Yeah thanks for the help guys. But the bit i'm struggling with is the actually diagram. Half the wire colors and locations match the other half doesn't :/ I've gone through all the diagrams on suzukiinfo but none as the same. Guess i'll just have the foolow all the plugs back and remove the rest.