| auszookers.com https://auszookers.com/forum/ |
|
| Compatible Jimny Springs https://auszookers.com/forum/viewtopic.php?f=5&t=36572 |
Page 1 of 1 |
| Author: | JCB [ Mon Oct 22, 2012 8:31 pm ] |
| Post subject: | Compatible Jimny Springs |
Hey guys, I just picked up my 2010 Suzuki Jimny today and i want to get a 2'' lift but don't want to spend a bundle. My question is are there springs that are made for another car that would fit and be less costly than specialised jimny springs? If there isn't what are you guys using out there? Thoughts and past experience would be most appreciated. |
|
| Author: | kristov [ Mon Oct 22, 2012 8:32 pm ] |
| Post subject: | Re: Compatible Jimny Springs |
using the normal front springs in the back will give you a 3 inch lift at the back |
|
| Author: | JCB [ Mon Oct 22, 2012 8:46 pm ] |
| Post subject: | Re: Compatible Jimny Springs |
Yeah... I still want to do it properly i.e. springs and shocks. Will i need to install longer brake hoses after a 2 inch lift? |
|
| Author: | kristov [ Mon Oct 22, 2012 9:01 pm ] |
| Post subject: | Re: Compatible Jimny Springs |
i got 2 inch lift on my jim and im going to be putting longer brake lines as when im full flex they are pritty tight and thats with a sway bar without you will def need them also have a look on this shop http://www.jimnybits.co.uk/shop/jimny/cat_1.html cheapest 2 inch lift around and probably one of the best |
|
| Author: | JCB [ Mon Oct 22, 2012 9:04 pm ] |
| Post subject: | Re: Compatible Jimny Springs |
I was looking at this earlier. Have you bought anything off there? What is the shipping like. dont want to wait around for 3 weeks before it comes in... |
|
| Author: | kristov [ Mon Oct 22, 2012 9:08 pm ] |
| Post subject: | Re: Compatible Jimny Springs |
i just got my lift from there last week |
|
| Author: | JCB [ Mon Oct 22, 2012 9:15 pm ] |
| Post subject: | Re: Compatible Jimny Springs |
What sized tyres are you running? was originally thinking 235/75/15 but I'm now thinking it may stuff with the ratios too much... |
|
| Author: | Mike57 [ Mon Oct 22, 2012 9:21 pm ] |
| Post subject: | Re: Compatible Jimny Springs |
215/75/15 is as big as you want to go with stock gearing. I agree with Kristov, Jimnybits service was pretty good. I also needed the extended brake lines for just a 40mm lift. It was the rear that was really tight for me. |
|
| Author: | kristov [ Mon Oct 22, 2012 9:29 pm ] |
| Post subject: | Re: Compatible Jimny Springs |
yeh the rear gets ridiculously tight with any lift i currently run 225/75/15 the put ratio out a little bit but i wouldn't change and they fill the guards nicer than 215s |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|