| auszookers.com https://auszookers.com/forum/ |
|
| Efi Head on carby block https://auszookers.com/forum/viewtopic.php?f=5&t=36628 |
Page 1 of 1 |
| Author: | Mudmagnet [ Wed Oct 24, 2012 9:24 pm ] |
| Post subject: | Efi Head on carby block |
i was wondering if it is possible to put a Efi vitara head on a carby 1.6 vitara block |
|
| Author: | BlueSuzy [ Wed Oct 24, 2012 9:59 pm ] |
| Post subject: | Re: Efi Head on carby block |
change pistons wiring exhaust manifold |
|
| Author: | Mudmagnet [ Wed Oct 24, 2012 10:09 pm ] |
| Post subject: | Re: Efi Head on carby block |
so it does bolt on but you need everything from the con rods up do you know if a 1.6 baleno head will work? |
|
| Author: | BlueSuzy [ Wed Oct 24, 2012 10:29 pm ] |
| Post subject: | Re: Efi Head on carby block |
Pistons need to be changed for head valves Pretty much middle up. What year baleno? Dizzy models need vit cam anyway for a 90degree dizzy. Coilpack models need a crank sensor, not easily modded into a normal block. Better off getting a whole Bal motor |
|
| Author: | Mudmagnet [ Wed Oct 24, 2012 10:53 pm ] |
| Post subject: | Re: Efi Head on carby block |
probably better of geting the full Efi from the vitara then, looks like less trouble |
|
| Author: | BlueSuzy [ Wed Oct 24, 2012 11:22 pm ] |
| Post subject: | Re: Efi Head on carby block |
Do you know if your sierra has a sierra sump? It drops a lot at rear of motor Some people have enough room for vit sump All will be bolt in as you already have a adapt plate or something to suit the gbox |
|
| Author: | Mudmagnet [ Thu Oct 25, 2012 10:15 pm ] |
| Post subject: | Re: Efi Head on carby block |
ive already got the fully vitara carby motor in, but the carby is on the way out so i was lookinf for another option with more power |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|