So you wanna build something like this beast......
viewtopic.php?f=4&t=17450&hilit=built4thrashing
| auszookers.com https://auszookers.com/forum/ |
|
| Thinking about stepping up to a GV. https://auszookers.com/forum/viewtopic.php?f=5&t=36659 |
Page 1 of 1 |
| Author: | got_bar_work [ Fri Oct 26, 2012 6:42 am ] |
| Post subject: | Thinking about stepping up to a GV. |
well the motor in my vit is destoyed So im thinking rather then tring to do a engine swap i might as well start with a car with more power to start with I want to make it more capable off road then my vit And heaps better on road and be able to tow my camper Going to change all the things i dont like about the way the vit was set up Thinking 4door 2.5 auto Will my diffs and tc bolt in Thinking 2in body 245/76/16 For road and easy trips as that wat my ute runs so i have spare tires i can use off that for now Then 33 pit bull rockers for hard trips Im thinking For suspension 12in Coilover rear Move link mounts down on the chassis 2in and move the diff mounts up 2in Sone sort of swaybar For the front im going to try something different If i can get it passed Cut out rear crossmember and drop the entire front setup 3in Then make new crossmember I will run 2in springs get it passed then drop in 4in springs Will need steering shar extension Hilux cv should work well And some custom struts Going to set up the front to use every bit of cv travel My vit doesnt have much uptravel Any one know if u can tap a rp steering for hydro assist A double ended ram would take most the pressure of the weak rack and help turn the Pitbulls This is going to be body off build Not scared of cutting will be running roof sliders and stuff so will need to respray anyway Aiming at king of the hammers style rig here Something that can play in the rocks then smash it out at high speed Wat r peoples thoughts |
|
| Author: | BlueSuzy [ Fri Oct 26, 2012 6:58 am ] |
| Post subject: | Re: thinking about steeping up to a gv |
I wouldn't bother keeping ifs unless you want to redesign the whole setup. Diff in middle, longer arms, longer axles etc Why not just 2.7 yours now? |
|
| Author: | got_bar_work [ Fri Oct 26, 2012 7:50 am ] |
| Post subject: | Re: thinking about steeping up to a gv |
The vit can only tow 400kg The gv has longer cv so more travel Bigger brakes Engine swap seems like to much trouble in the vit I would love to go center diff but it needs to come down 5in to clear sump wich isnt happening with a road regoes car with the new rules |
|
| Author: | GeckoXL7 [ Fri Oct 26, 2012 8:21 am ] |
| Post subject: | Re: thinking about steeping up to a gv |
With the GV can get 4" suspension lift easy, just need Front Diff Drop brakets, Sway bar drop brakets, Extended trailing arms (optional) Adjustable Pan Rod, Prop shaft Spacer, and just drop the rear brake line a bit. Body Lift on top of 4inch lift if have ABS wires will need to be recliped to give extra length they have plenty of length on them, Brake lines may need to be extended but can unclip and make new braket up for them to lower the steel lines a bit to give length, and steering arm will need spacer. Plus front camber bolts may need two each side as i did at that height. CV's are fine if have diff drop brakets, at 3" at the moment CV Angle is prob only 15degrees with diff drops. Manual locking hubs help alot for city driving and saves a bit of fuel. Tire size wise with body lift and all can fit in quite large diameter tires but anything over 235 70 R16 will need wheel spacers on front as they do rub on chassy when doing u turns. Seen 2.5L GVs going around quite cheap from time to time between 4500 and 6500, towing wise there pretty capable |
|
| Author: | atari4x4 [ Fri Oct 26, 2012 8:23 am ] |
| Post subject: | Re: thinking about steeping up to a gv |
you forgot one thing... GV's looks like jelly beans. |
|
| Author: | GeckoXL7 [ Fri Oct 26, 2012 8:32 am ] |
| Post subject: | Re: thinking about steeping up to a gv |
Lol true 2door SWB GV's can do nothing but laugh they look like blown up RC toys. Would go for a 4door LWB They def need a bull bar as standard front they look a bit babyish. |
|
| Author: | got_bar_work [ Fri Oct 26, 2012 10:53 am ] |
| Post subject: | Re: thinking about steeping up to a gv |
First get rid of all the plastic on the outside Massive guard chop and tube fenders boat side etc will fix the look i think |
|
| Author: | Built4thrashing [ Fri Oct 26, 2012 11:29 am ] |
| Post subject: | Re: thinking about steeping up to a gv |
So you wanna build something like this beast...... viewtopic.php?f=4&t=17450&hilit=built4thrashing
|
|
| Author: | Joe [ Fri Oct 26, 2012 6:45 pm ] |
| Post subject: | Re: thinking about steeping up to a gv |
GeckoXL7 wrote: Lol true 2door SWB GV's can do nothing but laugh they look like blown up RC toys. 
|
|
| Author: | BlueSuzy [ Fri Oct 26, 2012 7:29 pm ] |
| Post subject: | Re: thinking about steeping up to a gv |
got_bar_work wrote: Aiming at king of the hammers style rig here Something that can play in the rocks then smash it out at high speed Solid axle. That is all. |
|
| Author: | DarkHorse [ Fri Oct 26, 2012 8:26 pm ] |
| Post subject: | Re: thinking about steeping up to a gv |
Sounds like a lot more trouble than an engine swap would be - have you spoken to an engineer about increasing the GVM/tow rating on the Vit? Have you spoken to an engineer about cutting/relocating mounts and an entire cross-member? Sounds ambitious... PM me when you start parting out the Vit 
|
|
| Author: | SierraDan [ Fri Oct 26, 2012 8:30 pm ] |
| Post subject: | Re: thinking about steeping up to a gv |
Custom solid housing in front. Sierra hubs/CV's custom axles to suit Vit track width. DOO it |
|
| Author: | got_bar_work [ Sat Oct 27, 2012 6:10 am ] |
| Post subject: | Re: thinking about steeping up to a gv |
Sas Wheres the fun it that Sas. Been done million times before Not many tuff ifs rigs out there I like to be different |
|
| Author: | laurie [ Sat Oct 27, 2012 8:03 am ] |
| Post subject: | Re: thinking about steeping up to a gv |
love the title of this thread as a GV owner i have decided to step up to a sierra good luck with your plans 
|
|
| Author: | BlueSuzy [ Sat Oct 27, 2012 8:19 am ] |
| Post subject: | Re: thinking about steeping up to a gv |
well hilux ifs cv's don't last long under a hilux. Id be thinking bigger. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|