| auszookers.com https://auszookers.com/forum/ |
|
| ruf on spoa https://auszookers.com/forum/viewtopic.php?f=5&t=3675 |
Page 1 of 1 |
| Author: | ajsr [ Wed Dec 31, 2008 12:38 am ] |
| Post subject: | ruf on spoa |
hey guys can anyone who has tried it help me does ruf work ok on a spoa short wb zook?? it has a 65 mm chassis extension already so I can do a proper ruf but i worried it may be too soft. the springs id like to use are now flat rancho 2"lift also how much would it move my diff forward on a full ruf? cheers andrew |
|
| Author: | ajsr [ Sat Jan 03, 2009 3:00 am ] |
| Post subject: | Re: ruf on spoa |
anyone???? im planning on trying to squeeze 35's under it and need advice |
|
| Author: | Damo [ Sat Jan 03, 2009 12:33 pm ] |
| Post subject: | Re: ruf on spoa |
There is nothing wrong with putting longer springs in the front, SPUA or SPOA. How soft it is comes down to spring rate, which is effected by the length of your spring, but also width, thickness of leaves and number of leaves. You should be able to put the rear springs in the front then tweak them if you find it's too soft. From memory putting the RUF will put your diff forward about and inch. With SPOA and 35s you're still going to have to do more to stop the tyres chewing your gaurds. |
|
| Author: | Pubic [ Sat Jan 03, 2009 12:41 pm ] |
| Post subject: | Re: ruf on spoa |
im doing something similar mate. i moved my diff forward around 8" by doing a chasis extension and i used corona rt104 springs. there is a leaf spring thread in tech chat that you can use to work out how far the different types of springs will move your diff forward. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|