Post up a pic. I've only seen balenos here with coil pack on top.
It could be an import motor?
| auszookers.com https://auszookers.com/forum/ |
|
| g13b - g16b conversion https://auszookers.com/forum/viewtopic.php?f=5&t=36756 |
Page 1 of 1 |
| Author: | oz17ub [ Tue Oct 30, 2012 12:02 pm ] |
| Post subject: | g13b - g16b conversion |
I know theres probably a thousand topics about this already but i cant seem to find the answer im after. On the weekend my motor started chokin up and has noe become a smoker,believing that it is either piston rings or valve seats im thinking to spend the money on a g16 upgrade but i cant quite seem to find what i will need and how hard it will be. |
|
| Author: | BlueSuzy [ Tue Oct 30, 2012 12:24 pm ] |
| Post subject: | Re: g13b - g16b conversion |
What can you do? How Mechanical are you? How Electrical are you? How much $ is in your undies? Your right, there is a thousand topics. |
|
| Author: | defibros [ Tue Oct 30, 2012 12:24 pm ] |
| Post subject: | Re: g13b - g16b conversion |
have a read at this viewtopic.php?f=17&t=4853 |
|
| Author: | oz17ub [ Tue Oct 30, 2012 1:06 pm ] |
| Post subject: | Re: g13b - g16b conversion |
Mechanically and electrically pretty good. Just comes down to cash really... |
|
| Author: | want33s [ Tue Oct 30, 2012 4:17 pm ] |
| Post subject: | Re: g13b - g16b conversion |
What do you mean by "a g16 card upgrade " ? |
|
| Author: | Birdman1985 [ Wed Mar 27, 2013 7:24 am ] |
| Post subject: | Re: g13b - g16b conversion |
Just gonna hijack this thread to save starting another. I have began the saga of the engine conversion, struggling to remove the g13bb,but before I get too far I have a question I desperately need answered. My g13 has the coil packs on the head between the ignition leads, but looking at the baleno engine I got shipped to me the coil packs are on the rear, in turn making the engine 10cm longer in depth. Will this engine fit? |
|
| Author: | stockman [ Wed Mar 27, 2013 7:56 am ] |
| Post subject: | Re: g13b - g16b conversion |
Post up a pic. I've only seen balenos here with coil pack on top. It could be an import motor?
|
|
| Author: | Birdman1985 [ Wed Mar 27, 2013 8:35 am ] |
| Post subject: | Re: g13b - g16b conversion |
Yeah that looks like it. But how will that work on a north/South engine. |
|
| Author: | stockman [ Wed Mar 27, 2013 9:11 am ] |
| Post subject: | Re: g13b - g16b conversion |
Custom bracket?  It may be possible to convert to the standard setup, but the coil packs are pricy and you may need to change the rocker cover. |
|
| Author: | Birdman1985 [ Thu Mar 28, 2013 6:39 pm ] |
| Post subject: | Re: g13b - g16b conversion |
Yeah I could use my camshaft and rocker cover, then all I have to worry about is mounting points from the easr/West fitting n/s |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|