| auszookers.com https://auszookers.com/forum/ |
|
| 2'' procomp lift wtf, now i have a mexican hoopy https://auszookers.com/forum/viewtopic.php?f=5&t=36849 |
Page 1 of 1 |
| Author: | joel [ Sat Nov 03, 2012 4:43 pm ] |
| Post subject: | 2'' procomp lift wtf, now i have a mexican hoopy |
wtf have i done wrong here? meant to be a 2'' procomp lift from jimnybits, 3 coils are the same length and one was a bit longer, that on went to the rear drivers side, why is the front so low and the ass so high? i could swap the coils around and see if that makes a difference, but im trying to avoid that as its hot and im sick.  
|
|
| Author: | joel [ Sat Nov 03, 2012 4:44 pm ] |
| Post subject: | Re: 2'' procomp lift wtf, now i have a mexican hoopy |
or is this just how it is? |
|
| Author: | SierraDan [ Sat Nov 03, 2012 4:46 pm ] |
| Post subject: | Re: 2'' procomp lift wtf, now i have a mexican hoopy |
Wouldnt front coils be higher rate than rear? Id say theyre in the wrong way.. |
|
| Author: | jimny_timmy [ Sat Nov 03, 2012 4:46 pm ] |
| Post subject: | Re: 2'' procomp lift wtf, now i have a mexican hoopy |
Longest coil goes in the drivers front... And the drivers coliseum are the longest of the 4 to compensate the engine weight etc |
|
| Author: | Scales [ Sat Nov 03, 2012 4:56 pm ] |
| Post subject: | Re: 2'' procomp lift wtf, now i have a mexican hoopy |
Lol yeah dude, long coils go in front.... engine is heavier than.... nothing. |
|
| Author: | joel [ Sat Nov 03, 2012 5:00 pm ] |
| Post subject: | Re: 2'' procomp lift wtf, now i have a mexican hoopy |
lmao im pretty crrok, i was sure i stuffed it up but was hoping it was everybody elses fault lmao, i just looked at it and cngf changing it and drove home, i will have to get it on the hoist again at workk 2moro. my first incling was that the rear shocks are at max lenght just sitting there. im such a dickhead, and i do this for a living lmao. |
|
| Author: | jimny_timmy [ Sat Nov 03, 2012 5:02 pm ] |
| Post subject: | Re: 2'' procomp lift wtf, now i have a mexican hoopy |
joel wrote: lmao im pretty crrok, i was sure i stuffed it up but was hoping it was everybody elses fault lmao, i just looked at it and cngf changing it and drove home, i will have to get it on the hoist again at workk 2moro. my first incling was that the rear shocks are at max lenght just sitting there. im such a dickhead, and i do this for a living lmao.  noon!!!!Don't worry mate, if it makes you feel any better, I've done this before too lol |
|
| Author: | atari4x4 [ Sat Nov 03, 2012 5:29 pm ] |
| Post subject: | Re: 2'' procomp lift wtf, now i have a mexican hoopy |
 
|
|
| Author: | christover1 [ Sat Nov 03, 2012 6:09 pm ] |
| Post subject: | Re: 2'' procomp lift wtf, now i have a mexican hoopy |
I've never made any silly mistakes ever 
|
|
| Author: | stockman [ Sat Nov 03, 2012 6:22 pm ] |
| Post subject: | Re: 2'' procomp lift wtf, now i have a mexican hoopy |
Easy mistake to make if 3 were the same length. Any markings at all? |
|
| Author: | GRPABT1 [ Sat Nov 03, 2012 6:36 pm ] |
| Post subject: | Re: 2'' procomp lift wtf, now i have a mexican hoopy |
Where exactly do you work? Lol |
|
| Author: | joel [ Sat Nov 03, 2012 7:14 pm ] |
| Post subject: | Re: 2'' procomp lift wtf, now i have a mexican hoopy |
stockman wrote: Easy mistake to make if 3 were the same length. Any markings at all? nope no markings, or stickers, usually they have a part number followed by a "ps" or "ds" or rear etc, but not these. meh i will switch them 2moro, i should have went eith it when i was doing the rear and noticed the shocks were at full length, but i just wanted it finished, doing this straight after work was starting to take the fun away 
|
|
| Author: | joel [ Sat Nov 03, 2012 7:15 pm ] |
| Post subject: | Re: 2'' procomp lift wtf, now i have a mexican hoopy |
atari4x4 wrote: 8O shut up you! still better than a tara! |
|
| Author: | joel [ Sun Nov 04, 2012 12:33 pm ] |
| Post subject: | Re: 2'' procomp lift wtf, now i have a mexican hoopy |
results 
|
|
| Author: | jimny_timmy [ Sun Nov 04, 2012 3:49 pm ] |
| Post subject: | Re: 2'' procomp lift wtf, now i have a mexican hoopy |
|
|
| Author: | atari4x4 [ Sun Nov 04, 2012 3:55 pm ] |
| Post subject: | Re: 2'' procomp lift wtf, now i have a mexican hoopy |
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|