| auszookers.com https://auszookers.com/forum/ |
|
| 1999 Jimny Aerial Screw Spacing https://auszookers.com/forum/viewtopic.php?f=5&t=36917 |
Page 1 of 1 |
| Author: | MisterTee [ Tue Nov 06, 2012 6:24 pm ] |
| Post subject: | 1999 Jimny Aerial Screw Spacing |
I just bought an aftermarket aerial for our 1999 hardtop and the screw holes are 78mm apart in the new aerial but the factory threads in the roof are only ~64mm apart. There's no listings for pillar aerials with this spacing for Jimny or Sierra but there is one for Ignis. Anyone else able to measure how far apart the screws are in your 1999 Jimmy hardtop aerial please? Cheers, Tony |
|
| Author: | suzkboy [ Tue Nov 06, 2012 6:29 pm ] |
| Post subject: | Re: 1999 Jimny Aerial Screw Spacing |
U sure you didnt buy a soft top one because they are different |
|
| Author: | MisterTee [ Tue Nov 06, 2012 6:47 pm ] |
| Post subject: | Re: 1999 Jimny Aerial Screw Spacing |
Soft top ones are even longer I'm sure i didn't get a soft top one. |
|
| Author: | losfer [ Tue Nov 06, 2012 7:53 pm ] |
| Post subject: | Re: 1999 Jimny Aerial Screw Spacing |
you are only going to get that aerial genuine only , from memory $120 |
|
| Author: | MisterTee [ Sat Feb 09, 2013 9:24 am ] |
| Post subject: | Re: 1999 Jimny Aerial Screw Spacing |
losfer wrote: you are only going to get that aerial genuine only , from memory $120 Incorrect. I finally picked up one of these locally and it fits perfectly. Hope this might help anyone else out there. http://www.ryda.com.au/Aerpro-AP193-Suz ... /ap193.htm |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|