Great bit of gear. But there can be a huge wait for them. Last I checked it was a 4 month delay.
| auszookers.com https://auszookers.com/forum/ |
|
| LROR new extreme duty transfer case cradle https://auszookers.com/forum/viewtopic.php?f=5&t=36995 |
Page 1 of 1 |
| Author: | sierra35 [ Fri Nov 09, 2012 5:31 pm ] |
| Post subject: | LROR new extreme duty transfer case cradle |
Hi guys... Anyone bought one? Or have an opinion about it? http://www.lowrangeoffroad.com/index.ph ... radle.html I'm trying to decide whether I'll be better off simply purchasing one of these or getting a mate to help fabricate a cradle & incorporate a roctoy & heavy duty mounts.. Im currently running 6.5's & 35's.... Thoughts/opinions? Cheers! |
|
| Author: | Fatzook [ Fri Nov 09, 2012 5:56 pm ] |
| Post subject: | Re: LROR new extreme duty transfer case cradle |
Great bit of gear. But there can be a huge wait for them. Last I checked it was a 4 month delay.
|
|
| Author: | sierra35 [ Fri Nov 09, 2012 6:03 pm ] |
| Post subject: | Re: LROR new extreme duty transfer case cradle |
Ah...fick.. Cheers mate. |
|
| Author: | SierraDan [ Fri Nov 09, 2012 6:06 pm ] |
| Post subject: | Re: LROR new extreme duty transfer case cradle |
Werent they released a couple of days ago Pete? |
|
| Author: | TryHard [ Fri Nov 09, 2012 8:24 pm ] |
| Post subject: | Re: LROR new extreme duty transfer case cradle |
could go the mighty Kong Case and weld a Ring on if u really wanted |
|
| Author: | sierra35 [ Fri Nov 09, 2012 8:42 pm ] |
| Post subject: | Re: LROR new extreme duty transfer case cradle |
Yeh I saw that's what afew people have done.. Isn't this new cradle pretty similar to that setup? |
|
| Author: | Red89 [ Fri Nov 09, 2012 8:49 pm ] |
| Post subject: | Re: LROR new extreme duty transfer case cradle |
The new one is better as it picks up another mount. |
|
| Author: | KEENSY85 [ Sat Nov 10, 2012 5:32 am ] |
| Post subject: | Re: LROR new extreme duty transfer case cradle |
Could u just get ur original mounts and I and just plate them (increasing thickness) and mount a rock toy ring to it? |
|
| Author: | KEENSY85 [ Sat Nov 10, 2012 5:37 am ] |
| Post subject: | Re: LROR new extreme duty transfer case cradle |
Could u just get ur original mounts and I and just plate them (increasing thickness) and mount a rock toy ring to it? Justcruising makes awsome tcase mounts also u could easily ad a rocktoy ring to it (I think someone road here said that he can get rocktoy rings) Fatzookster might have an option as well since he's back on deck 
|
|
| Author: | sierra35 [ Sat Nov 10, 2012 11:38 am ] |
| Post subject: | Re: LROR new extreme duty transfer case cradle |
Does the ring in the new mount work pretty much the same as a roctoy? |
|
| Author: | ajsr [ Sat Nov 10, 2012 12:21 pm ] |
| Post subject: | Re: LROR new extreme duty transfer case cradle |
cant really see the need for such a HD mount JMO |
|
| Author: | KEENSY85 [ Sat Nov 10, 2012 12:38 pm ] |
| Post subject: | Re: LROR new extreme duty transfer case cradle |
Really? |
|
| Author: | SierraDan [ Sat Nov 10, 2012 12:56 pm ] |
| Post subject: | Re: LROR new extreme duty transfer case cradle |
Horses for courses. |
|
| Author: | Fatzook [ Sat Nov 10, 2012 2:06 pm ] |
| Post subject: | Re: LROR new extreme duty transfer case cradle |
SierraDan wrote: Werent they released a couple of days ago Pete? Yep. My bad. The link didn't load, so I assumed it was the red cradles that they sell. My bad. |
|
| Author: | Red89 [ Sat Nov 10, 2012 3:24 pm ] |
| Post subject: | Re: LROR new extreme duty transfer case cradle |
KEENSY85 wrote: Could u just get ur original mounts and I and just plate them (increasing thickness) and mount a rock toy ring to it? You can and when I did this it started ripping the bolts out of the case and bending the chassis mounts. |
|
| Author: | KEENSY85 [ Sat Nov 10, 2012 3:59 pm ] |
| Post subject: | Re: LROR new extreme duty transfer case cradle |
What specs? What size tyres and reduction gears? Would u have rathered u didn't run a rocktoy ring, or just plated the original mounts? What would u have done differently?
|
|
| Author: | Red89 [ Sat Nov 10, 2012 5:03 pm ] |
| Post subject: | Re: LROR new extreme duty transfer case cradle |
KEENSY85 wrote: What specs? What size tyres and reduction gears? Would u have rathered u didn't run a rocktoy ring, or just plated the original mounts? What would u have done differently? That was on 33's, 5.14 TC gears and 5.12 diff gears, thickened pass side arm and gusseted drivers side arm, raised case with solid mounts and driving nothing but rocks. Differently ? I would have used RHS to raise the factory rubber mounts, or Just_cruzin's mounts, or added the extra rubber mount to the pass side like someone posted on here, this would possibly have been enough. The stock arms start bending once you are twin locked on 31's or bigger, with gearing and on high traction terrain. The Roctoy ring does help some but as with any mod it simply moves the problem to somewhere else in the driveline and the chassis mounts and case bolts become the next weakest point from my experience. |
|
| Author: | shep [ Sat Nov 10, 2012 7:38 pm ] |
| Post subject: | Re: LROR new extreme duty transfer case cradle |
I reckon It is solid mounts that kill Sierra transfer cases. |
|
| Author: | Fatzook [ Sat Nov 10, 2012 10:18 pm ] |
| Post subject: | Re: LROR new extreme duty transfer case cradle |
shep wrote: I reckon It is solid mounts that kill Sierra transfer cases. X2. You need a fusable link. Otherwise the case or gear faces will become the next best thing.
|
|
| Author: | Red89 [ Sun Nov 11, 2012 12:49 am ] |
| Post subject: | Re: LROR new extreme duty transfer case cradle |
Have never killed a case it was just the arms and mounts that bent with the solid mounts. However I ran solid mounts for a few years and only had to straighten the arms/mounts 2 or 3 times in that period, so it wasnt a 'huge' issue when I was on 33's with 38's though I was lucky to get 1/2 an hour out of it before they would twist to the point the input shaft was starting to come through the floor. But by the same token there has been a few threads over the years of people chewing through the rubber mounts every trip, arms are easy enough to straighten were as the rubber mounts tend to be ripped in half. |
|
| Author: | hooki [ Sun Nov 11, 2012 4:01 am ] |
| Post subject: | Re: LROR new extreme duty transfer case cradle |
I've been waiting nearly 5 months for my transfer cradle from lowrange (should be here next week) and now they release their own cradle which looks like a better design for roughly the same money  
|
|
| Author: | KEENSY85 [ Sun Nov 11, 2012 7:07 am ] |
| Post subject: | Re: LROR new extreme duty transfer case cradle |
I'm waiting on gears and they rekon there are 10 on back order in front of me 
|
|
| Author: | sierra35 [ Sun Nov 11, 2012 10:23 pm ] |
| Post subject: | Re: LROR new extreme duty transfer case cradle |
Well i purchased the new cradle..planning on using it with justcruizin's lifted mounts. See how it all holds up! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|