thanks man will have a look at your thread
| auszookers.com https://auszookers.com/forum/ |
|
| Baleno G16B hose/thermostat questions https://auszookers.com/forum/viewtopic.php?f=5&t=37391 |
Page 1 of 1 |
| Author: | kenny.G345 [ Mon Nov 26, 2012 5:02 pm ] |
| Post subject: | Baleno G16B hose/thermostat questions |
Currently doing a baleno G16B and was wondering wich thermostat housing and hose combination people have used |
|
| Author: | stockman [ Mon Nov 26, 2012 5:05 pm ] |
| Post subject: | Re: Baleno G16B questions |
Suzuki swift housing. There are part numbers floating around my thread. As for the hoses, next to nothing off the shelf. You will have to mix and match. Some go over the exhaust manifold and some including myself go under the intake manifold. |
|
| Author: | kenny.G345 [ Mon Nov 26, 2012 6:10 pm ] |
| Post subject: | Re: Baleno G16B questions |
thanks man will have a look at your thread
|
|
| Author: | kenny.G345 [ Sun Jan 06, 2013 8:53 pm ] |
| Post subject: | Re: Baleno G16B questions |
ok so the motor is in but it hits the vacum connector for the booster, what have other people done to fix this?? |
|
| Author: | jimbo_jones [ Sun Jan 06, 2013 9:51 pm ] |
| Post subject: | Re: Baleno G16B questions |
you can spin it around so it points up |
|
| Author: | kenny.G345 [ Sun Jan 06, 2013 10:49 pm ] |
| Post subject: | Re: Baleno G16B questions |
It already pointed up and it won't go any other way because of the plate on the back of the inlet manifold, I am pretty sure I need one from an xd/xf falcon if it fits |
|
| Author: | jonno_racing [ Sun Jan 06, 2013 11:23 pm ] |
| Post subject: | Re: Baleno G16B questions |
can you use jimny bits? |
|
| Author: | kenny.G345 [ Mon Jan 07, 2013 9:12 pm ] |
| Post subject: | Re: Baleno G16B questions |
hey cuzz i used a xf/xd one with a new grommet, fitted mint |
|
| Author: | boostedbrick [ Tue Jan 08, 2013 9:19 am ] |
| Post subject: | Re: Baleno G16B questions |
My balena setup uses sierra hoses with some pipe under the intake. Hoses are trimmed to suit but makes replacment easy, instead of mixing up random hoses. NOS Swift thermostate housing is the go, one of the new ones I purchased hit the firewall. |
|
| Author: | kenny.G345 [ Tue Jan 08, 2013 10:40 pm ] |
| Post subject: | Re: Baleno G16B questions |
Rogie, cheers mate I just got to run the hose to the heater core and to the bottom of the radiator and its done
|
|
| Author: | kenny.G345 [ Thu Jan 17, 2013 9:02 pm ] |
| Post subject: | Re: Baleno G16B questions |
so can anyone tell me what they did for the hoses to the heater?? |
|
| Author: | kenny.G345 [ Mon Jan 21, 2013 9:55 pm ] |
| Post subject: | Re: Baleno G16B hose/thermostat questions |
Anyone??? |
|
| Author: | kenny.G345 [ Wed Jan 30, 2013 10:25 pm ] |
| Post subject: | Re: Baleno G16B hose/thermostat questions |
Ok so I am up to the wiring and was wondering what other connectors do I need apart from all the ones for the motor?? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|