so any progress? you going to do it or can i buy it yet
| auszookers.com https://auszookers.com/forum/ |
|
| 1L locker https://auszookers.com/forum/viewtopic.php?f=5&t=3747 |
Page 1 of 1 |
| Author: | tonka_zook [ Tue Jan 06, 2009 12:50 pm ] |
| Post subject: | 1L locker |
hey just woundering if the arb lockers for a sierra fit both 1L and 1.3L diffs thanks tonka_zook |
|
| Author: | joeblow [ Tue Jan 06, 2009 1:05 pm ] |
| Post subject: | Re: 1L locker |
ahh...nope. |
|
| Author: | tonka_zook [ Tue Jan 06, 2009 3:02 pm ] |
| Post subject: | Re: 1L locker |
wats the differents ? |
|
| Author: | Trojan [ Tue Jan 06, 2009 4:05 pm ] |
| Post subject: | Re: 1L locker |
tonka_zook wrote: wats the differents ?
They're a different diff |
|
| Author: | Saam [ Tue Jan 06, 2009 8:00 pm ] |
| Post subject: | Re: 1L locker |
1 litre have different diffs axles transfer cv's driveshafts than the rest, so don't break anything they are hard to find in good condition lol |
|
| Author: | 3cyl [ Tue Jan 06, 2009 9:10 pm ] |
| Post subject: | Re: 1L locker |
1 litre diffs are smaller like LJ ones, axle splines are like Sierra but different length and wheelbearings (you can remove rear axles without taking off backing plates). Unfortunately for lockers it's either Lockright or welded. |
|
| Author: | tonka_zook [ Wed Jan 07, 2009 2:13 am ] |
| Post subject: | Re: 1L locker |
can you put 1.3L diffs under, if so how hard because one of my mate have pulled all of the running gear off a 1.3 with a rear locker 2'' lift and i can get cheap. |
|
| Author: | Zook_Fan [ Wed Jan 07, 2009 2:21 am ] |
| Post subject: | Re: 1L locker |
if not how much does he want for all of the running gear???? and what is happening with the rest of the car?? |
|
| Author: | tonka_zook [ Wed Jan 07, 2009 2:23 am ] |
| Post subject: | Re: 1L locker |
dnt no how much yet and the zook he has put hilux diff under it |
|
| Author: | Zook_Fan [ Wed Jan 07, 2009 2:23 am ] |
| Post subject: | Re: 1L locker |
oh ok so it is just the diffs he has pulled out? |
|
| Author: | tonka_zook [ Wed Jan 07, 2009 2:26 am ] |
| Post subject: | Re: 1L locker |
i pretty sure he pull he pull all of it out |
|
| Author: | Zook_Fan [ Wed Jan 07, 2009 2:27 am ] |
| Post subject: | Re: 1L locker |
righto well if you dont buy it please tell him i am extremely interested in it |
|
| Author: | Zook_Fan [ Wed Jan 07, 2009 2:28 am ] |
| Post subject: | Re: 1L locker |
where does he live? oh and sorry for the hijack |
|
| Author: | tonka_zook [ Wed Jan 07, 2009 2:29 am ] |
| Post subject: | Re: 1L locker |
nah its alright he lives out west about 10 minutes from gracemere |
|
| Author: | Zook_Fan [ Wed Jan 07, 2009 2:30 am ] |
| Post subject: | Re: 1L locker |
sweet pm me if he gives you a price |
|
| Author: | tonka_zook [ Wed Jan 07, 2009 2:32 am ] |
| Post subject: | Re: 1L locker |
yeah ok |
|
| Author: | tonka_zook [ Wed Jan 07, 2009 11:13 am ] |
| Post subject: | Re: 1L locker |
back to what i was talking about can you pull out the 1L diffs and put the 1.3L diffs under the, if so how hard ? |
|
| Author: | BlueSuzy [ Wed Jan 07, 2009 1:24 pm ] |
| Post subject: | Re: 1L locker |
Never done it before but it shouldent be much of an issue.. Yours is NT so the 1.3 diffs will have to be NT for straight boltin. WT you will have to cut and weld new mounts for springs.. Driveshafts may be an issue e.g Your flanges will be smaller for the 1L diffs. Maybe just an issue of redrilling the diff flanges to suit. Again unsure... |
|
| Author: | tonka_zook [ Wed Jan 07, 2009 9:01 pm ] |
| Post subject: | Re: 1L locker |
the diffs are wt ones and i already got the 1.3 drive shafts in mine |
|
| Author: | mrw82 [ Wed Jan 07, 2009 11:05 pm ] |
| Post subject: | Re: 1L locker |
reweld the spring perches on the diff housings. |
|
| Author: | tonka_zook [ Sat Jan 10, 2009 2:18 am ] |
| Post subject: | Re: 1L locker |
so it not that hard |
|
| Author: | Zook_Fan [ Wed Jan 28, 2009 2:55 am ] |
| Post subject: | Re: 1L locker |
so any progress? you going to do it or can i buy it yet
|
|
| Author: | tonka_zook [ Wed Jan 28, 2009 3:16 am ] |
| Post subject: | Re: 1L locker |
no can't do it but he wants $1,000 for the front and rear with a arb ai locker in the rear n spring set up |
|
| Author: | Zook_Fan [ Wed Jan 28, 2009 3:26 am ] |
| Post subject: | Re: 1L locker |
where does he live? got a phone number? pm me his details |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|