| auszookers.com https://auszookers.com/forum/ |
|
| Starter motor difficulties https://auszookers.com/forum/viewtopic.php?f=5&t=37631 |
Page 1 of 1 |
| Author: | reeceh [ Sun Dec 09, 2012 9:51 am ] |
| Post subject: | Starter motor difficulties |
Almost finished replacing the g16b in my Sierra with a petroworks adaptor kit. I had no problem the first time. However now I'm having trouble putting the starter motor in!! I've tried spinning the tiny cog bit by bit but to no luck! Wtf |
|
| Author: | want33s [ Sun Dec 09, 2012 1:23 pm ] |
| Post subject: | Re: Starter motor difficulties |
What starter are you using? If the G13 Sierra starter, you will need to grind the block side of the starter down a few mm. |
|
| Author: | reeceh [ Sun Dec 09, 2012 6:37 pm ] |
| Post subject: | Re: Starter motor difficulties |
It has been grounded. I got the bugger in. I had to hold it in possy, then lightly tap it in with a hammer. |
|
| Author: | shep [ Sun Dec 09, 2012 7:35 pm ] |
| Post subject: | Re: Starter motor difficulties |
Hammers. Is there nothing they can't fix? |
|
| Author: | reeceh [ Sun Dec 09, 2012 8:18 pm ] |
| Post subject: | Re: Starter motor difficulties |
I purchased this beaut little supercheap auto mini mini sledge. It's like a foot long all steel with about 1kg head and a rubber sheath handle. It is fucken perfect size for a toolbar and does wonders when something does not want to play! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|