as I said on the phone, take it somewhere for a 2nd opinion.
| auszookers.com https://auszookers.com/forum/ |
|
| go damn diff problems https://auszookers.com/forum/viewtopic.php?f=5&t=37707 |
Page 1 of 1 |
| Author: | sicktara [ Wed Dec 12, 2012 6:27 pm ] |
| Post subject: | go damn diff problems |
hey, awhile ago i fitted front and rear arb air lockers, in a 89 swb vitara, nothing but problems, i had the diff centre set up by a diff guy, the rear diff started making a high pitch grind, took it back and the diff guy reset it, and lapped it out, turned out the oil wasnt thick enough, the oil was lsx 90 it cause scoring to the c&p causing them to bind in a way, which i think is right cause its the same oil we use in diffs at work. i then used castol 80w-180 oil witch the diff dude sugested, that went fine for a while, then bam, same problem. does any one know what it is? i replaced the bearings for brand new ones every time, im thinking maybe its the lockers? had any one had this problem? cause im god damn sick of pooring money into the diffs. its not the guy setting the diffs up as i know a few people who have never had a problem. please help. cheers jordan |
|
| Author: | sicktara [ Wed Dec 12, 2012 6:28 pm ] |
| Post subject: | Re: go damn diff problems |
im now after 2 sets of 5.12 c&p |
|
| Author: | atari4x4 [ Wed Dec 12, 2012 6:29 pm ] |
| Post subject: | Re: go damn diff problems |
as I said on the phone, take it somewhere for a 2nd opinion.
|
|
| Author: | sicktara [ Wed Dec 12, 2012 6:32 pm ] |
| Post subject: | Re: go damn diff problems |
yeah no i will gus, i find my self fixing it a week away befor and epec trip. problem after problem, modified car. love em, and hate them |
|
| Author: | joeblow [ Wed Dec 12, 2012 7:01 pm ] |
| Post subject: | Re: go damn diff problems |
sicktara wrote: hey, awhile ago i fitted front and rear arb air lockers, in a 89 swb vitara, nothing but problems, i had the diff centre set up by a diff guy, the rear diff started making a high pitch grind, took it back and the diff guy reset it, and lapped it out, turned out the oil wasnt thick enough, the oil was lsx 90 it cause scoring to the c&p causing them to bind in a way, which i think is right cause its the same oil we use in diffs at work. i then used castol 80w-180 oil witch the diff dude sugested, that went fine for a while, then bam, same problem. does any one know what it is? i replaced the bearings for brand new ones every time, im thinking maybe its the lockers? had any one had this problem? cause im god damn sick of pooring money into the diffs. its not the guy setting the diffs up as i know a few people who have never had a problem. please help. cheers jordan I know what it is....your diff guy is an asshat. If a Jap crown wheel and pinion needs lapping....its farked. |
|
| Author: | sicktara [ Wed Dec 12, 2012 7:07 pm ] |
| Post subject: | Re: go damn diff problems |
so a new c&p is the got? he lapped it even when it was fine, would that of fucked it? were would be the best place for a new r&p |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|